SKU: CAN26-602
MPN: 26-602
The Canton 26-602 is an 8-micron replacement filter element built for the company's 4-inch and Marine fuel filter housings. It's a serviceable element rather than a throwaway canister, so builders running Canton's billet filter bodies can swap the media and keep the housing in service. At 8-micron filtration, this element catches fine debris before it reaches the carburetor or injectors, which matters on engines fed by high-flow pumps. Anyone maintaining a Canton fuel system, or stocking spares for a race weekend, will find this the correct service part for the short-style 4-inch housing.
This is a single 2-5/8 inch tall element rated for 8-micron filtration, made in the USA. The 8-micron rating sits on the finer end of the fuel filtration scale, trapping particles that coarser 60- and 100-micron screens pass through, which is why it pairs well with carbureted and pressurized systems alike. Because it drops into the existing Canton 4-inch or Marine housing, there's no need to replace plumbing or fittings during a service interval. Canton backs the element with a one-year warranty against defect when installed in its correct application. For builders comparing media grades, we also carry coarser elements and complete fuel filters alongside this replacement part.
Pull and replace this element on a regular maintenance schedule, or sooner if you've run questionable fuel or freshly plumbed a tank. The marine compatibility makes it a fit for boat fuel systems where contamination control is non-negotiable, and the 4-inch housing application covers a wide range of street and race setups. Keep a spare on the shelf so a clogged element never sidelines a session. Browse our full air and fuel selection for housings, regulators, and related filter elements to keep your fuel system serviced and flowing clean.
This element fits Canton's 4-inch and Marine fuel filter housings in the short configuration. It's a direct replacement for the existing element, so you reuse the same billet housing and fittings during a service interval rather than swapping out the entire filter body.
Micron rating describes the size of particles the media traps. At 8 microns, this element captures fine debris that coarser 60- or 100-micron screens let pass. The finer media suits carbureted and pressurized fuel systems where small contaminants can foul jets or injectors.
The element measures 2-5/8 inches tall, sized for the short version of Canton's 4-inch and Marine fuel filter housings. Confirm your housing length before ordering, since Canton offers taller elements for longer filter bodies.
Yes. Per Canton specifications, the 26-602 is made in the USA and carries a one-year warranty against defect when installed in its correct application.
Replace it on a regular maintenance schedule, or sooner if you've run dirty fuel, freshly plumbed a tank, or notice reduced flow. Keeping a spare element on hand prevents a clogged filter from cutting a race weekend short.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
