SKU: 516101050
UPC: 050806106956
The Brownells Lewis Lead Remover Kit for 50 Caliber delivers a proven method for eliminating lead deposits from large-bore rifle barrels. Sized specifically for .500-.501 caliber bores, this kit addresses the stubborn fouling that accumulates after extended shooting sessions with cast or swaged lead projectiles. Unlike chemical-only approaches, the Lewis system combines mechanical action with brass's natural lead-attracting properties to pull fouling directly from the rifling grooves. Competitive shooters and collectors maintaining heavy-caliber rifles rely on this design to preserve accuracy without risking bore damage from aggressive wire brushes.
The kit includes a rubber tip with 8-32 threads that attaches directly to standard cleaning rods, along with specially woven brass patches engineered to conform to the bore's contour. These patches work by physically lifting lead and plastic wad residue as they pass through the barrel—the brass fibers grip fouling particles that solvents alone often leave behind. A dedicated wrench simplifies rod attachment, ensuring a secure connection during cleaning strokes. The 8-32 threading matches most common rifle cleaning rod configurations, making integration into your existing cleaning kits straightforward. The brass construction is softer than barrel steel, so repeated use won't score or wear your rifling.
This Lewis Lead Remover Kit earns its place in any shooter's maintenance routine for fifty-caliber platforms where lead fouling impacts group sizes. It's particularly valuable after range sessions with hard-cast bullets or when preparing a barrel for long-term storage. Pair it with quality solvents and degreasers to address copper fouling separately, then follow up with the Lewis system for lead. We stock replacement brass patches and compatible cleaning accessories to keep your kit performing through years of use. Browse our complete selection of patches and mops for all your bore maintenance needs.
This kit requires cleaning rods with 8-32 threads, which is a standard size found on most rifle cleaning rods. The included rubber tip attaches directly to compatible rods, and the kit comes with a wrench to secure the connection.
No. Brass is significantly softer than the steel used in rifle barrels. The specially woven brass patches conform to your bore's rifling and lift lead deposits without scratching or wearing the barrel's surface, even with repeated use over time.
While bore brushes scrub the surface, the Lewis system uses woven brass patches that physically attract and grip lead particles through direct metal-to-metal contact. This pulls fouling from rifling grooves more effectively than brushing alone.
No. This kit is sized specifically for .500-.501 caliber bores. Lewis Lead Remover kits are caliber-specific because the brass patches must properly conform to the bore diameter. Using the wrong size won't effectively remove fouling.
The Lewis system targets lead fouling specifically. For comprehensive cleaning, use a copper solvent first to address jacket fouling, then follow with the Lewis Lead Remover for lead deposits. This two-step approach keeps your bore in optimal condition.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
