SKU: TIP8106-50
MPN: TIP8106-50
The Oval Head Dzus Buttons .550 Long 50 Pack Black from Ti22 PERFORMANCE are quick-turn fasteners built for racers who pull body panels on and off constantly. These are the slotted oval head buttons used across sprint car and dirt track builds, where a quarter turn locks or releases a nose, side panel, or access cover without tools. Sold as a set of 50 (part TIP8106-50), this pack covers a full body rebuild or restocks the trailer. If you run quick-disconnect bodywork and want fasteners that drive with a flat blade or coin, this is the standard hardware for the job.
Each button has a 7/16 x 0.550 inch body, machined from aluminum and black anodized to fight corrosion and match dark panel finishes. The .550 length pairs with standard Dzus spring plates and clips to set grip depth on common panel and frame thicknesses. The oval head sits proud enough to grip and turn quickly but stays low against the surface, and the slotted drive accepts a screwdriver or a coin in the pits. Anodizing adds a hard surface layer that resists the scuffing and weather that chew up bare aluminum over a season. Buy them in volume here because race bodywork eats fasteners, and matching every button to the same finish keeps a build looking consistent. They work alongside the matching spring plates and Dzus mounting plates needed to complete an install.
Reach for these when you are building or refreshing a race body that needs to come apart fast between heats. They handle nose cones, hood panels, tail sections, and any access door where speed in the pits matters. A 50-pack gives you spares for the ones that walk off or get cross-threaded mid-season. Pair them with hood Dzus kits and the rest of our body fastener kits to outfit a complete panel system. Browse the full fasteners lineup for the springs, plates, and hardware that round out a Dzus setup.
These have a .550 inch body length and a 7/16 inch diameter, listed as 7/16 x 0.550 inch per Ti22 PERFORMANCE specifications. The .550 length sets the grip depth, so match it to the spring plate and panel thickness on your build for a secure quarter-turn lock.
This is a 50-pack, sold as part number TIP8106-50. That quantity covers a full body rebuild or keeps spares in the trailer for fasteners that get lost or damaged over a race season.
They are machined from aluminum with a black anodized finish per the manufacturer listing. Anodizing adds a hard surface layer that resists corrosion and scuffing, and the dark finish blends with black or painted race panels.
Yes. Dzus quick-turn buttons lock into a matching spring plate or clip mounted behind the panel. These buttons handle the visible side; pair them with Dzus mounting plates and springs to complete a working quick-disconnect setup.
The slotted oval head accepts a flat-blade screwdriver or a coin, which makes them fast to operate in the pits without special tools. A quarter turn locks or releases the panel.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
