SKU: ALL76297-10
UPC: 848238065862
MPN: ALL76297-10
The 4 Pin Weather Pack Square Shroud Housing from ALLSTAR PERFORMANCE is a sealed four-circuit male connector housing sold as a set of 10, built for builders who need weatherproof wiring in automotive and racing applications. This is the square shroud male side of the Weather Pack system, designed to mate with the matching female receptacle and seal out moisture, dust, and vibration that would corrode or back out an unsealed connector. It handles 16-24 gauge wire and carries the ALL76297-10 part number. Anyone wiring a race car, off-road rig, or any harness exposed to the elements will recognize this as the connector that holds up where standard automotive plugs fail.
Each housing accepts four terminals and is rated for 16-24 gauge wire at 12V and 20 amps, which covers most low-current circuits like lighting, sensors, switches, and accessory feeds. The square shroud body is molded from black plastic and uses the Weather Pack sealing design that has been used by major vehicle manufacturers for decades. The four-pin layout keeps related circuits bundled in a single keyed connector, so a harness section can be disconnected and reconnected without confusion. Buying these as a set of 10 makes sense for a full vehicle build or a shop that wires multiple harnesses. Pair them with the matching seals and terminals to complete each connection. The full Weather Pack line lives in our wiring components section.
Reach for these housings when you are building or repairing a harness that lives outdoors or under the hood, where heat cycling, water, and road grime are constant. The four-pin configuration suits trailer wiring, sensor runs, switch panels, and any multi-wire branch that needs a clean, sealed disconnect point. Each connector keys to its mate so circuits stay in order during reassembly. If you are building a full system, look at our wire terminals and the broader ignitions and electrical catalog for the seals, leads, and switches that finish the job.
This listing is a set of 10 square shroud male housings under part number ALL76297-10. Buying them in a 10-pack covers a full vehicle harness or stocks a shop that wires multiple builds, so you are not chasing single connectors mid-project.
Each four-pin housing is rated for 16-24 gauge wire at 12V and 20 amps. That range covers most low-current circuits such as lighting, sensors, switches, and accessory feeds in automotive and racing wiring.
This is the male square shroud housing. It mates with the corresponding Weather Pack female receptacle. To complete a connection you will also need the matching terminals and seals for the gauge of wire you are running.
Weather Pack is a sealed connector system designed for harsh conditions, used by major vehicle manufacturers for circuits exposed to moisture, dust, heat, and vibration. It keeps connections reliable where unsealed automotive plugs would corrode or work loose over time.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
