SKU: TPBBB16-1
MPN: TPBBB16-1
The TPBBB16-1 Lithium Battery Box for One Battery is a single-cell containment and mounting solution built for racing and high-performance automotive use. It holds one lithium racing battery upright and bolts down securely, giving builders a clean way to relocate a battery to the trunk, firewall, or a custom bracket location. Total Power Battery designed it for shops and racers who run lightweight lithium cells and need a steel enclosure that keeps the battery fixed under hard cornering, launches, and vibration. It ships as a complete kit with mounting hardware and a battery tray, so it installs without sourcing extra parts.
Construction is 16ga mild steel, fully welded at every seam for a rigid, one-piece enclosure. The upright design uses flared mounting holes that stiffen the panels and add strength where the box takes load. Outside dimensions measure 9.25 inches long by 3.125 inches wide by 7 inches tall, sized to carry a single lithium racing cell in a vertical orientation. A black powder coat finish covers the steel to resist corrosion and underhood heat. The kit includes the battery tray and all mounting hardware, so the box mounts directly to a floor pan, panel, or fabricated bracket. Pair it with proper cabling and a cutoff for a finished install — see our battery cable kits and master disconnect switches in the same category.
Racers relocating a battery for weight balance or tech-inspection compliance use this box to lock a lithium cell in place where loose mounting would fail. It suits drag, circle track, and street builds running lightweight lithium batteries that need a secure home. Because it's a single-battery enclosure, it fits tight engine bays and trunk corners where a dual box won't go. Mount it, run your leads, and tie in a disconnect for a clean charging setup. Browse the rest of our ignitions and electrical lineup for the cables, switches, and lithium batteries that complete the job.
It holds one lithium racing battery in an upright orientation. The enclosure measures 9.25 inches long by 3.125 inches wide by 7 inches tall, sized for a single lightweight lithium cell. If you need to mount two batteries, look at the dual and longer box options in our ignitions and electrical category.
It's built from 16ga mild steel with every seam fully welded into a one-piece enclosure. The upright design uses flared mounting holes that add rigidity and strength, and the steel is finished in a black powder coat to resist corrosion and heat.
Yes. The TPBBB16-1 ships as a complete kit with mounting hardware and a battery tray included, so you can mount it to a floor pan, panel, or fabricated bracket without sourcing additional parts.
It's a containment and mounting solution for lithium racing batteries in high-performance automotive builds. Racers use it to relocate a battery for weight balance or tech compliance, keeping the cell locked down under launches, cornering, and vibration.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
