Out of stock
SKU: WWFPL-KIT
MPN: PL-KIT
This consumable kit from WOODWARD FAB keeps the PL-320 and PL-500 plasma cutters running between jobs. Plasma consumables are wear items by design, and the electrodes, nozzles, cups, and diffusers degrade with every cut as they channel the arc and protect the torch head. Fabricators, automotive shops, and weekend metalworkers who run either of these machines need replacement stock on the shelf to avoid downtime mid-project. The kit (MPN PL-KIT) bundles the components that fail first, so a worn nozzle or spent electrode doesn't stop a cut line halfway through a panel. It is built specifically for these two torch platforms.
The kit includes five dual-sided electrodes that create the cutting arc and burn through metal, plus five nozzles that direct the plasma stream and hold the cut accurate. Two ceramic cups shield the nozzle and electrode while guiding the plasma flow, and two ceramic diffusers control flow and cut down on turbulence at the torch tip. The dual-sided electrode design means each one carries two usable faces before replacement. Compatibility is matched to the PL-320 rated at 30 amps and the PL-500 rated at 40 amps, so the consumables seat correctly and hold the gas seal these torches depend on for clean, repeatable cuts. Swapping a degraded nozzle or electrode is part of normal plasma operation, and keeping these on hand pays off on longer fabrication runs.
Anyone cutting sheet steel, brackets, or chassis components with a PL-320 or PL-500 will eventually need this kit. Nozzles wear fastest under heavy duty cycles, and a fresh electrode restores arc stability when cuts start dragging or spattering. Order a kit before consumables run low rather than after a cut goes sideways. Pair it with our other shop equipment and fabrication gear, or browse the full tools catalog for grinding discs, cutting wheels, and related supplies to round out the metalworking bench.
It is matched to the WOODWARD FAB PL-320, rated at 30 amps, and the PL-500, rated at 40 amps. The electrodes, nozzles, cups, and diffusers are sized to seat correctly in both torch heads for a proper gas seal and accurate cuts.
The kit contains five dual-sided electrodes, five nozzles, two ceramic cups, and two ceramic diffusers. These are the high-wear parts that degrade during normal plasma cutting and need periodic replacement to maintain clean cut quality.
Wear depends on duty cycle, material thickness, and amperage. Nozzles and electrodes typically degrade fastest. Signs you need a swap include arc instability, increased spatter, slower cuts, or a wider, ragged kerf. Keeping a kit on hand prevents downtime mid-project.
A dual-sided electrode carries two usable faces, so each electrode can be flipped and reused once before replacement. This stretches the service life of the five electrodes in the kit across more cutting time.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
