JL Audio MVi Marine Amplifier Monoblock Sub-woofer Amplifier 600 Watts 12v

Ships Within 1-2 Business Days

Free Shipping On Orders Over $500

Options

$899.99
Or

WARNING ⚠️

You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE.  Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.

Purchasing a Firearm? Click HERE to see our firearm purchasing guide. 

Info

SKU:JLA0100333400 ,UPC:

SKU: JLA0100333400

UPC: 699440986441

MPN: 010-03334-00

Info

SKU:
JLA0100333400
UPC:
699440986441
MPN:
010-03334-00

Description

JL Audio MVi Marine Amplifier Monoblock Sub-woofer Amplifier 600 Watts 12v

98644

Model: MV600/1

4-Channel Class D Full-Range Amplifier, 125 W x 4 @ 2 ohms / 70 W x 4 @ 4 ohms - 14.4V

Engineered specifically for powersports applications, the 4-channel MX500/4 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.

Generating a solid 70W x 4 into 4 ohms (14.4V, 1% THD), the MX500/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 250W x 2 into 4 ohms.

Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.

This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.

USA Limited Warranty: Two (2) years from the original date of purchase.

Specifications
Rated Continuous (RMS) Power @ 14.4 V
@ 4 ohms 70 W RMS x 4
@ 2 ohms125 W RMS x 4
Bridged @ 4 ohms250 W RMS x 2
Rated Continuous (RMS) Power @ 12.5 V
@ 4 ohms55 W RMS x 4
@ 2 ohms 90 W RMS x 4
Bridged @ 4 ohms 180 W RMS x 2
General Specifications
Frequency Response 20 Hz - 20 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power >88 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W >70.5 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 ohms>92 / 50 Hz
Damping Factor @ 2 ohms >43 / 50 Hz
THD+N @ Rated Power<1% @ 2 ohms per Ch.
Input Voltage Range @ RCA InputsSwitchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High)
Min.Copper Power / Ground Wire Gauge4 AWG wire
Fuse Rating 50 A (AFS, AGU or MaxiFuse™)
Signal Processing
Filter Mode(s) Low-Pass or High-Pass
Filter Slope(s) 12 dB/octave
Filter Frequency Range 35 Hz - 300 Hz
Detented, Calibrated Filter Freq. PotentiometersYes
Filter Defeat Function Yes
Remote Level ControlNo
Remote Level Modes N/A
Channel Input Mode Switch Yes (2/3/4 ch.)
Pass-Through Preamp OutputNone
Source Channel Selection for PreOuts N/A
Physical Specifications
Height 1.77 in / 45 mm
Width 9.33 in / 237 mm
Depth4.50 in / 115 mm

What's in the Box:
  • (1) Amplifier
  • (4) Stainless steel mounting screws
  • (1) User manual