SBC Pro-Mag Rocker Arms 7/16 Stud/1.6 Ratio

Options

$254.82
MSRP: $255.95
You save $1.13
Or

Trusted By Over 250,000+ Happy Customers Serving outdoor enthusiasts nationwide

Info

SKU:COM1605-8 ,UPC:

SKU: COM1605-8

UPC: 036584195900

MPN: 1605-8

Info

SKU:
COM1605-8
UPC:
036584195900
MPN:
1605-8

Description

The SBC Pro-Mag Rocker Arms 7/16 Stud/1.6 Ratio by COMP CAMS delivers precision valve actuation for small-block Chevy engines seeking reliable performance gains. Built for both street and strip applications, these rocker arms address a critical weak point in stock valve train geometry—the mechanical disadvantage between camshaft lobe lift and valve opening distance. A 1.6 ratio multiplies cam lift by 1.6 times, translating to greater valve lift and improved cylinder breathing without requiring aggressive cam grinds that compromise reliability.

COMP CAMS engineered these Pro-Mag rocker arms with the 7/16-inch stud configuration, the industry standard for small-block Chevy applications from the 283 through the 400. The 1.6 ratio provides meaningful valve lift multiplication—typically 0.6 inches of additional lift per 0.1 inches of cam lobe lift—while maintaining acceptable valve spring pressures and pushrod geometry. Precision-cast construction ensures consistent weight and dimensional tolerances across the set, critical for stable idle quality, consistent valve timing across all eight cylinders, and predictable power delivery across the RPM band. The Pro-Mag design minimizes deflection under load, reducing valve float and promoting reliable sealing at high engine speeds.

These rocker arms suit builders upgrading carbureted or fuel-injected small-block Chevys with aftermarket cam packages, aluminum heads, or port-matched cylinder head work. The 1.6 ratio strikes a practical balance—more aggressive than stock 1.5 ratios for measurable power gains, yet conservative enough to avoid demanding expensive valve train upgrades like beehive springs or hardened pushrods on moderate-duty builds. Installation requires standard pushrod-style valve train configuration with 7/16-inch stud holes; verify your block, heads, and intake manifold clearance before purchase, particularly with tall valve covers or headers. A complete rocker arm set supplies both intake and exhaust sides for V8 configurations.

SpecificationDetail
Brand
COMP CAMS
MPN / Part Number
1605-8
UPC
036584195900
SKU
COM1605-8
Weight
4.8 lbs
Dimensions
3.9 x 3.8 x 12.8 in
Rocker Arm Type
Stamped Steel / Cast Iron
Lift Ratio
1.6:1
Stud Diameter
7/16 inch
Engine Platform
Small-Block Chevy (SBC)
Compatible Valve Train
Pushrod Configuration
Quantity
Complete Set (8 Rocker Arms)

WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.