Stage 2 Thumpr Camshaft LS 4.8L/5.3L/6.0L Trucks

Options

$390.50
MSRP: $404.95
You save $14.45
Or

Trusted By Over 250,000+ Happy Customers Serving outdoor enthusiasts nationwide

Info

SKU:COM54-702-11 ,UPC:

SKU: COM54-702-11

UPC: 036584386421

MPN: 54-702-11

Info

SKU:
COM54-702-11
UPC:
036584386421
MPN:
54-702-11

Description

The Stage 2 Thumpr Camshaft LS 4.8L/5.3L/6.0L Trucks is designed for GM truck owners seeking that iconic, aggressive exhaust note without sacrificing the modern drivability required for a daily driver. This camshaft is a prime choice for LS-based engine swaps or performance upgrades in Silverado, Sierra, and Tahoe platforms where a noticeable power increase is desired alongside a heavy muscle car lope. By optimizing the valve timing specifically for the cathedral port heads found on most 4.8L, 5.3L, and 6.0L blocks, this unit provides a significant power bump across the mid-to-high RPM range while maintaining the utility needed for truck applications.

Engineered as a No Springs Required (NSR) hydraulic roller design, the Stage 2 Thumpr Camshaft LS 4.8L/5.3L/6.0L Trucks features a precision-ground lift profile of 0.541 inches on the intake and 0.539 inches on the exhaust side. The 113-degree lobe separation angle is a critical technical specification, as it allows the engine to maintain sufficient manifold vacuum for power brakes and accessories while creating the overlapping exhaust pulses that define the Thumpr series. With an advertised duration of 280/299 and a broad operating range of 1800 to 6500 RPM, this camshaft utilizes advanced lobe geometry to maximize airflow efficiency without putting excessive wear on the factory valvetrain.

This Stage 2 Thumpr Camshaft LS 4.8L/5.3L/6.0L Trucks is ideal for street-driven trucks and SUVs where a torque-heavy power band is essential for moving the heavier curb weights associated with these chassis. It is fully compatible with GM LS-series engines, specifically focusing on the Gen III and Gen IV 4.8L, 5.3L, and 6.0L variants commonly found in GMT800 and GMT900 vehicle generations. While the NSR design technically allows for use with stock valve springs, professional installation by a qualified mechanic and a custom ECU recalibration are highly recommended to fully realize the performance gains and ensure a stable, reliable idle in various weather conditions.

SpecificationDetail
Brand
COMP CAMS
MPN / Part Number
54-702-11
UPC
036584386421
SKU
COM54-702-11
Weight
9.92 lbs
Dimensions
3 x 2.75 x 24.5 in
Engine Compatibility
GM LS-Series (4.8L, 5.3L, 6.0L)
Camshaft Type
Hydraulic Roller
Intake / Exhaust Lift
0.541" / 0.539"
Advertised Duration
280 / 299
Lobe Separation Angle
113 Degrees
Operating RPM Range
1800 - 6500 RPM
Spring Requirements
No Springs Required (NSR)

WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.