SKU: KNSKNS-CZ-V762
MPN: KNS-CZ-V762
The KNS Czech Valve 762 Bren 2 is an adjustable gas reduction plug built for the CZ Bren 2 chambered in 7.62x39mm. It replaces the factory gas plug and lets shooters dial back how much gas drives the operating system. That matters most on suppressed rifles, where the added backpressure pushes the bolt carrier harder than the gun was tuned for. Made by KNS Precision, Inc., this part is aimed at Bren 2 owners running cans, mixed ammunition, or anyone chasing softer recoil and cleaner cycling. It fits all 7.62x39 Bren 2 models except the 8-inch 5.56 variant.
Construction is steel with a black matte finish, so it holds up to the heat and pressure cycling at the gas port. The valve offers multiple position settings, described by some sources as a three-position regulator, giving the shooter discrete tuning steps rather than a single fixed flow rate. Backing the gas off reduces bolt carrier velocity, which cuts felt recoil, lowers the rate of fouling blown back into the action, and extends component life on an over-gassed gun. Because tuning is reversible, a shooter can run a higher setting for suppressed fire and open it back up for standard unsuppressed loads. The 8-inch 5.56 Bren 2 is the one platform this 7.62x39 valve does not cover, a limit noted consistently across KNS sources. Installation is recommended by a qualified gunsmith.
If you run a suppressor on a Bren 2 in 7.62x39 and the rifle short-strokes, throws brass to the moon, or beats up the bolt carrier, this valve gives you the adjustment range to bring it back into spec. It also helps when switching between commercial steel-case and brass-case loads that build different pressures. Pair it with other Bren 2 fire control and operating components in our action rifle parts selection, and browse the full gas system parts and broader replacement parts catalog to round out a build.
It replaces the factory gas plug and lets you reduce the amount of gas driving the operating system. Backing the gas off lowers bolt carrier velocity, which cuts felt recoil, reduces fouling, and helps tame over-gassing, particularly when a suppressor adds backpressure to the system.
This valve fits CZ Bren 2 rifles chambered in 7.62x39mm across all models except the 8-inch 5.56 variant. That exclusion is noted consistently across KNS sources. If you have a 5.56 Bren 2, you need the 5.56 version of the Czech Valve instead.
Yes. It offers multiple position settings, described by some retailers as a three-position regulator. You can dial in more restriction for suppressed fire and open it back up for standard unsuppressed loads, making it reversible for different ammunition and suppressor setups.
The valve is machined from steel with a black matte finish, chosen to handle the heat and pressure cycling at the gas port. Steel construction holds up to repeated firing and the elevated backpressure that comes with running a suppressor.
KNS recommends installation by a qualified gunsmith. The valve seats into the gas system of the Bren 2, and correct fitment plus proper initial tuning gets you the cleanest cycling and the best results from the adjustment range.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
