Schaefer Stainless Steel Cleat - 4.75"

The Schaefer Stainless Steel Cleat – 4.75" is a marine-grade hardware component engineered for securing lines and cordage to deck hardware, spars, and rigging systems on vessels and watercraft. Built from corrosion-resistant stainless steel with an open base design, this cleat accommodates maximum line diameter of 3/8" (10mm) and delivers the durability required in saltwater and high-exposure environments where standard hardware fails.

Measuring 4.75 inches in length with a 0.9-inch height, the cleat is designed for rapid deployment and secure line management under load. The open base features include integrated urethane washers that isolate the fastener connection from the mounting surface—a critical detail that reduces vibration transmission and prevents corrosion at the attachment point. Fastening requires standard #10 flat-head hardware spaced 1.25 inches center-to-center, a configuration compatible with standard deck layouts and retrofit applications. Weighing just 0.3 pounds, the cleat balances structural rigidity with minimal weight penalty, important for racing and cruising applications where load reduction matters.

This Schaefer Marine cleat suits riggers, sailing crews, boat owners, and marine technicians who demand hardware rated for continuous exposure to salt spray, moisture, and UV. Whether securing halyards, sheets, or control lines on a sailboat, or rigging temporary anchor points on a work vessel, the 4.75" stainless steel cleat provides the holding power and corrosion resistance that permits years of reliable service without maintenance-induced failure. Schaefer Marine's reputation for precision marine hardware manufacturing backs this component with design standards proven across commercial and recreational fleets.

Stainless steel cleats in this size range are the industry standard for deck-mounted line management on vessels 25 feet and larger. The 4.75-inch length provides sufficient working surface for wrapping and tensioning lines without oversizing the fastening footprint. Comparison with aluminum or plated-steel alternatives shows stainless maintains structural integrity in saltwater where cost-reduced materials corrode or pit within one to two seasons.