Out of stock
SKU: EAS14149Z
UPC: 607174110414
MPN: 14149Z
The Eastwood 2K Aero Spray Paint Epoxy Primer (MPN 14149Z) is a two-component, ceramic urethane epoxy primer packed into a 12 oz aerosol can. It is built for metalworkers, fabricators, and restoration shops that want true two-part performance without dragging out a paint gun and mixing cups. This gray primer goes direct to metal, including bare aluminum, and lays down the corrosion-resistant foundation that single-stage rattle-can primers can't match. If you are prepping body panels, repairing rust-prone steel, or sealing fresh fabrication work before topcoat, this is a primer that earns its place in a serious paints and finishing kit.
What makes this a two-part epoxy spray paint is the activated chemistry inside the can. Once activated, the formula carries a 48 to 72 hour pot life at 68°F, giving you a working window measured in days rather than minutes. A single can covers 10 to 16 square feet, enough for a fender, a hood section, or several smaller pieces. Unactivated, the can stores for up to three years, so you can keep one on the shelf until a project calls for it. The two-component ceramic urethane formulation bonds direct to metal and resists corrosion across steel and aluminum substrates, per Eastwood's specifications. It is offered in gray for body panels, with a black variant available for chassis and frame work.
Reach for this primer when surface prep matters and the substrate is bare or sanded metal. It is a strong match for restoration projects, panel repairs, and custom fabrication where a corrosion barrier under the topcoat is non-negotiable. After the primer cures, follow up with a compatible topcoat or a 2K urethane clear for a finished surface. Round out the workflow with companion products like a 2K urethane clear or a quality metal prep to clean and etch the surface before priming. Eastwood backs the can with a 90-day satisfaction guarantee.
No. This is a two-component epoxy primer delivered in a 12 oz aerosol can. You activate the can and spray, getting two-part performance without mixing cups, a gun, or cleanup. That makes it practical for spot repairs and smaller panel work where setting up spray equipment isn't worth the time.
One 12 oz can covers 10 to 16 square feet, depending on how heavy you lay it down and the surface texture. That is enough for a fender, a hood section, or several smaller fabricated pieces in a single session.
After activation, the primer carries a 48 to 72 hour pot life at 68°F. That gives you a multi-day working window. Unactivated, the can stores for up to three years, so you can keep one ready until a project needs it.
Yes. The two-component ceramic urethane formula is built for direct-to-metal applications, including aluminum, and provides corrosion resistance and strong adhesion on bare and sanded metal substrates. Clean and etch the surface first for best results.
SKU EAS14149Z is the gray primer, suited for body panels. Eastwood also offers a black variant under a separate SKU for chassis and frame painting.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
