Out of stock
SKU: CW92322
MPN: BLEEDKIT
The HyDrive Bleed Kit is a fluid top-up and bleeding tool for boaters running HyDrive hydraulic steering. It pours fresh hydraulic fluid into the top of the helm unit, which is how air gets purged and steering response stays tight. The kit suits HyDrive helm units 101, 102, 401, 402, 500, and 501 — the units commonly found on the HyDrive Admiral and Commander range. If your wheel feels spongy or your steering has gone soft after a fluid change, this is the kit that gets the system back to a solid, air-free feel. It ships under the MPN BLEEDKIT.
This is a maintenance accessory built around a simple job done right: refilling the helm and bleeding trapped air without making a mess. It includes the fittings and instructions HyDrive specifies for the small-vessel steering range, so the fluid feeds into the helm correctly and the system fills from the top down. Compatibility is specific — it works with HyDrive helm units 101, 102, 401, 402, 500, and 501, and is not a universal kit for every brand of hydraulic helm. The full package weighs about 0.15 lbs and ships in a 7 x 2 x 10 in box per manufacturer specifications. Keeping HyDrive fluid topped and bled is the difference between crisp lock-to-lock steering and a wheel that wanders under load.
Reach for this kit during seasonal service, after replacing a hose or cylinder, or any time the helm feels aerated. It pairs naturally with the rest of a hydraulic refresh — fresh fluid, a check of the helm and cylinder, and a proper bleed before splash. Boaters maintaining their own helms can browse our full steering systems selection for compatible HyDrive components, or check our boat tools for the rest of a service kit. For broader rigging and upkeep parts, our boat outfitting catalog covers the supporting gear that keeps a hydraulic helm running clean.
It suits HyDrive helm units 101, 102, 401, 402, 500, and 501, which are usually found on the HyDrive Admiral and Commander range. It is not a universal kit and is intended specifically for these small-vessel hydraulic steering helms.
It lets you pour fresh hydraulic fluid into the top of the helm unit to top up the system and purge trapped air. Bleeding air out is what restores firm, responsive steering and removes the spongy feel caused by an aerated helm.
Use it during seasonal service, after a fluid change, or any time the wheel feels soft or wanders under load. It is also the right tool after replacing a hose, helm, or cylinder, when the system needs to be refilled and bled before use.
No. The HyDrive Bleed Kit is a marine hydraulic steering maintenance accessory used to top up fluid and bleed HyDrive helm units. It is not a medical product.
The kit provides the fittings and instructions needed to top up and bleed the helm. You will need HyDrive-specified hydraulic fluid separately to fill the system.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
