SKU: AERFCL1544
UPC: 678146029416
MPN: FCL1544
The AEROQUIP FCL1544 is a #10 (-10 dash size) 120-degree hose end built for Socketless racing hose, finished in black anodized aluminum. It's aimed at fabricators and racers plumbing fuel, oil, and coolant lines where a sharp turn is needed and bench space behind the fitting is tight. The 120-degree bend lets you route a line around a fixed obstacle without kinking the hose or fighting a tight radius. As a reusable one-piece design, it assembles by hand onto compatible Socketless hose with no wrench or clamp, which keeps a build moving when you're fitting multiple lines.
This hose end carries a 7/8-14 thread on the female Society of Automotive Engineers 37-degree (AN-style) end, with a 0.48-inch inside diameter and a 1-inch outside diameter at the body. The hex measures 1 inch across the flats, and overall length runs about 2.161 inches with a 1.37-inch height. The black anodized aluminum body keeps weight down to roughly 0.12 lbs while resisting corrosion. The other end accepts Socketless hose (Eaton series 2556) in the -10 size; under pressure the hose contracts around the barb to lock the connection. No thread sealant is required on the threaded end. Note the hose cut-off factor of 0.62 inch when measuring assembled length against your routing.
Reach for this 120-degree end when a straight or 90-degree fitting won't clear a frame rail, header, or pump body and you still need a clean line route. It pairs with the matching Socketless racing hose and the rest of the -10 fitting family, so you can build a complete circuit from one system. Browse the full fittings, hoses and valves selection for the hose and adapters to finish the job, or compare angles with our straight 10 straight hose ends and 10 90-degree elbows when planning a run.
It's built for Socketless racing hose (Eaton series 2556) in the -10 dash size. Under pressure the hose contracts around the fitting barb to form a tight seal, so it locks in as line pressure rises.
No. This is a reusable one-piece design that pushes onto compatible Socketless hose by hand. No wrench, clamp, or separate socket is required, which makes building multiple lines faster on the bench.
The female Society of Automotive Engineers 37-degree (AN-style) end uses a 7/8-14 thread, which is standard for the -10 size. No thread sealant is needed on this end.
Yes. FCL1544 is the retail-packaged version and FBL1544 is the bulk version of the same fitting. The part itself is identical; only the packaging differs between the two listings.
Use the 120-degree end when a 90 turns the line too sharply for the clearance you have, such as routing around a frame rail or pump body. The wider bend reduces kinking and keeps flow cleaner on a tight run.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
