SKU: VHTSP650
UPC: 010155006505
MPN: SP650
The VHT SP650 is a gloss black epoxy spray paint built as a one-step, self-priming coating in an 11 oz. aerosol can. It's a practical pick for anyone refinishing tools, metal hardware, and small parts that take abuse from weather, chemicals, and handling. The acrylic epoxy formula goes down without a separate primer coat and dries to a hard, porcelain-like surface. Shooters and home gunsmiths reach for epoxy paint for guns because it holds up to solvents and oils better than standard rattle-can enamel, and this VHT product delivers that durability at a working-budget price. It sits alongside the rest of our black paints and coatings.
VHT lists this as a single-stage acrylic epoxy top coat with ceramic resins that resist heat up to 250F (121C) on intermittent exposure. The finish is chemical, corrosion, rust, and salt resistant, which is what separates it from a basic gloss enamel. It dries to the touch in roughly 30 minutes, handles in about an hour, and reaches full hardness overnight with no separate curing step required. The EZ Touch conical nozzle gives controlled fan patterns for even coverage on irregular shapes. Net contents run 11 oz. in a 17.6 oz. container, and the product carries a 31-month manufacturer's defect warranty per VHT specifications. For deeper builds, pair it with one of our black primers on bare or pitted metal.
This coating works for refinishing receivers, brackets, tool handles, suspension parts, and any steel or aluminum component that lives in a harsh environment. Prep the surface clean and dry, lay down light passes, and let each coat flash before the next. Because it's self-priming, it speeds up jobs where you don't want to stage multiple products. For best adhesion on greasy or oxidized metal, clean first with one of our metal prep solutions. Browse the full lineup in our paints and finishing section when you're matching colors or sourcing related supplies.
No. The SP650 is a self-priming, single-stage top coat, so it bonds directly to clean, prepped metal without a separate primer layer. On heavily pitted or previously rusted surfaces, mechanical prep and a clean degreased base still improve adhesion and final appearance.
The ceramic resins in the SP650 resist heat up to 250F (121C) on intermittent exposure per VHT specifications. It is not a header or exhaust paint. For parts that see sustained high temperatures, choose a dedicated high-temp coating instead.
It dries to the touch in about 30 minutes and can be handled in roughly one hour. Full hardness develops overnight, and no separate baking or curing step is required. Apply in light, even coats and let each pass flash before recoating.
Yes. The acrylic epoxy formula is rated chemical, corrosion, rust, and salt resistant, which is why it holds up better than standard rattle-can enamel on parts exposed to oils, cleaners, and weather. It cures to a hard, porcelain-like finish.
The SP650 ships in an aerosol can with 11 oz. net contents and a 17.6 oz. total container size. It uses an EZ Touch conical nozzle for controlled fan patterns on irregular shapes and small parts.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
