Out of stock
SKU: CW64087
UPC: 776113120101
MPN: 1201-F
The Dock Edge ProDock Heavy "P" profile is dock edge protection built for high-traffic piers and commercial slips. This kit ships as three 8-foot sections for 24 feet of total coverage in beige, designed to cushion hulls and protect dock framing along the waterline. It's aimed at marina operators and dock owners who need edging that holds up to constant contact and harsh marine exposure. The Heavy "P" carries thicker walls than standard profiles, so it works well where lighter edging would wear through. For more options across your setup, see our full anchoring and docking lineup.
Each 8-foot section is extruded from marine grade flexible PVC developed not to chip or crack under normal use. The profile is reinforced by an internal support, with heavier walls and integrally molded ribs for added strength and durability. UV and fungus inhibitors guard against fading, yellowing, deterioration from sunlight, and unsightly blotching, while the 100% virgin vinyl gives the surface a high-gloss finish. The PVC is unaffected by oil, gas, or salt water, which matters for edging that sits at the waterline year-round. Each section measures roughly 3 3/8 inches wide by 2 1/8 inches deep overall. Mounting hardware is not included, so plan your fasteners around your dock material. Pair the edging with matching bumpers and guards for full perimeter coverage.
This profile suits fixed docks, finger piers, and commercial marina slips where boats make repeated contact along the edge. The 24-foot run covers a typical slip side or can be combined across multiple cartons for longer installations. Beige blends into weathered wood and composite decking without standing out. Cut sections to length and fasten them along the dock face to take the hits that would otherwise mar your boards or scuff a hull. For corners and high-impact points, look at our fenders and piling caps to round out the dock.
Each carton includes three 8-foot sections of Heavy "P" profile, for a total of 24 feet of edging. You can combine multiple cartons for longer dock runs along finger piers or commercial slips.
It's extruded from marine grade flexible PVC using 100% virgin vinyl. The material is developed not to chip or crack under normal use and is unaffected by oil, gas, or salt water, with UV and fungus inhibitors to resist fading and yellowing.
No. Mounting hardware is not included. You'll need to supply fasteners suited to your dock material to secure the sections along the dock face.
Each 8-foot section measures approximately 3 3/8 inches wide by 2 1/8 inches deep overall. The profile is reinforced by an internal support and integrally molded ribs for added strength.
Yes. The Heavy "P" carries thicker walls and molded ribs over standard profiles, which makes it well suited to marinas and large commercial applications where edging sees constant boat contact.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
