Polyform HTM-1 Fender 6.3" x 15.5" - Graphite

The Polyform HTM-1 Fender 6.3" x 15.5" in Graphite is a hole-through-middle boat fender engineered for maximum protection across a wide range of mooring, docking, and offshore applications. This medium-duty fender combines proven Polyform construction with reinforced design features that prevent line-pull failures and puncture damage in demanding marine environments.

The HTM-1's defining specifications deliver real-world durability. Vertical ribs molded into the fender body provide directional protection and cushioning against repeated contact with piles, cleats, and vessel hulls. Reinforced tube ends prevent rope and line from pulling through if the fender becomes wedged in a tight spot—a critical feature in rough water or when maneuvering in congested anchorages. Extra wall thickness resists punctures and tears from sharp hardware and barnacle-encrusted structures common in both fresh and salt-water environments. At 4 lbs per unit, the fender balances sufficient buoyancy and mass for stable protection without excessive weight when deploying multiple fenders on larger hulls.

Suitable for recreational fishing boats, center console vessels, cruising sailboats, and commercial workboats in the 25–35-foot range, the HTM-1 delivers consistent performance where reliability matters. Weekend fishermen rely on it during tournaments and extended trips; commercial operators trust it during frequent docking operations. The graphite color resists UV fading and pairs cleanly with most hull finishes. The hole-through-middle design accepts standard 3/8" or 1/2" fender lines, making replacement and repositioning straightforward in any marine environment.