SKU: Q-ACC-PLANB-OMEGA-XL
UPC: 850035705834
MPN: ACC-PLANB-OMEGA-XL
The Q Cherry Bomb XL is a compact muzzle device for shooters who want reduced recoil and a smaller flash signature without adding bulk to the front of the barrel. Built from heat-treated 17-4 stainless steel with a copper finish, it measures 1.45 by 1.45 by 1.75 inches and weighs in at roughly 2.88 ounces. It threads on in either 1/2x28 or 5/8x24 pitch, making it a fit for most modern rifle barrels. For shooters running suppressor-ready setups, it pairs with the Plan-B Omega mounting hardware so the same device can serve double duty.
Q built the Cherry Bomb's internal geometry around its own taper-mount barrels, with a shoulder that aligns the device to the bore and a flat-to-flat front face that takes a socket for tightening. The 17-4 stainless body shrugs off the heat and gas erosion that a brake sees firing after firing, and the copper finish reflects the material under it rather than relying on a thin coating. The XL designation refers to the longer body relative to the standard Cherry Bomb, giving more port surface to redirect gas. It's listed as compatible with several common suppressor systems, including the SilencerCo Omega 300, Harvester Big Bore 338, Dead Air Nomad, YHM Turbo K, and Banish 338, which makes it a sensible choice for a multi-host rig.
This brake earns its place on rifles where the shooter is chasing flatter recoil and faster sight recovery, whether that's a precision bolt gun or a hard-use semi-auto. The dual thread pitch options mean it works across a wide range of calibers and hosts, and the suppressor compatibility opens the door to a quieter setup down the road. Shooters building out the front end of a rifle can browse our full lineup of muzzle brakes, compensators, and threaded barrels to match the device to the platform.
The Cherry Bomb XL is offered in 1/2x28 and 5/8x24 thread pitches, covering the most common pitches across modern rifle calibers. Match the pitch to your barrel's threading before ordering so the device seats correctly against the shoulder.
It is machined from heat-treated 17-4 stainless steel with a copper finish. The stainless body handles the heat and gas erosion that comes with repeated firing, which is why Q uses it on a device that mounts directly at the muzzle.
Yes. It is listed as compatible with several suppressor systems, including the SilencerCo Omega 300, Harvester Big Bore 338, Dead Air Nomad, YHM Turbo K, and Banish 338, allowing the same device to serve as both a brake and a suppressor mount.
It weighs roughly 0.19 lbs, or about 2.88 ounces, and measures 1.45 by 1.45 by 1.75 inches. The compact dimensions keep added length and mass at the muzzle to a minimum while still giving enough port surface to redirect gas.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
