Out of stock
SKU: JB92CTH
UPC: 082442900667
MPN: JB92CTH2
This is a factory Beretta 92 Compact/Centurion threaded barrel in 9mm, built specifically for the 92 Compact and Centurion frames and shipped with the locking block. It carries a 1/2x28 muzzle thread, which is the standard pitch for 9mm suppressors and most pistol muzzle devices. Shooters running a 92 Compact who want to mount a can or a thread-on compensator need a barrel with extended, threaded muzzle clearance, and this is the OEM part that does it without aftermarket fitting headaches. The barrel measures 4.8 inches overall and wears a black finish to match the 90 Series profile.
Beretta machines the standard 9mm 90 Series Compact/Centurion threaded barrel from its own steel blend and cuts the 1/2x28 threads at the factory, so the muzzle is concentric to the bore and squares up correctly against a suppressor or muzzle device. Because the locking block ships with the barrel, the assembly drops into the slide as a matched unit rather than forcing you to reuse a worn block from a high-round-count pistol. The 4.8-inch length adds enough barrel forward of the slide to clear thread engagement and a protector while keeping the gun balanced. Identified by MPN JB92CTH2, this is the same component Beretta lists as the 92 Compact/Centurion Extended Threaded Barrel under SKU JB92CTH on the manufacturer side.
Anyone converting a 92 Compact or Centurion for suppressed range work, a home-defense setup with a can, or simply replacing a tired factory barrel will use this part. The 1/2x28 thread pairs directly with 9mm cans and thread-on devices, and the threads stay protected by a cap when you run the pistol bare. If you are still sorting out the muzzle end of a build, browse our wider selection of pistol barrels or check the matching thread protectors and adapters we stock for 9mm hardware.
This barrel is built for the Beretta 92 Compact and Centurion series in 9mm. It is not designed for the full-size 92FS or M9 frame, which use a longer barrel. Confirm your pistol is a Compact or Centurion before ordering.
The muzzle is threaded 1/2x28, the standard pitch for 9mm suppressors and most thread-on pistol muzzle devices. That makes it a direct match for common 9mm cans and compensators without an adapter.
Yes. This part ships with the locking block, so the barrel and block install into the slide as a matched assembly. You do not have to reuse the locking block from your existing pistol.
Yes. It is a factory Beretta component, listed by the manufacturer as the 92 Compact/Centurion Extended Threaded Barrel in 9mm under SKU JB92CTH. Overall length is 4.8 inches with a black finish.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
