SKU: CW98863
MPN: 90720
The Attwood Swivl-Eze Pedestal 7" (MPN 90720) is a fixed-height boat seat post built for boaters who want a low, stable seating position without the cost of an adjustable column. At 7 inches tall, it fits jon boats, utility hulls, and bass rigs where a short pedestal keeps the center of gravity down. Despite the Swivl-Eze name, this particular model is a fixed post rather than a swiveling unit, so it works best as a foundation under a separate swivel-equipped seat. It pairs with most standard boat seating setups using common bolt patterns.
Construction is welded steel finished in black powder coat to hold up against spray and humidity. The post measures 7 inches high with a 6.75-inch square footprint, and Attwood Marine reinforces the welded joints where the column meets the plates. Both an integrated base mounting plate and a seat mounting plate are built in, so the pedestal carries the load directly through the steel rather than through fasteners alone. The hole pattern accommodates a range from 4.85 by 4.85 inches up to 5.8 by 5.8 inches, which matches the bolt spacing on most aftermarket bases and seat spiders. Total weight is about 4 pounds, light enough to handle during install but heavy-gauge enough to stay planted under load.
This pedestal makes sense when you need a permanent, low seat mount in a fishing boat or work skiff and don't want height adjustment in the way. Bolt the base plate to a reinforced deck, mount your seat spider or swivel to the top plate, and the column does the rest. It tested to standards set by the Coast Guard, the American Boat and Yacht Council, and the European Conformity program, so it holds up to the loads a real boat sees. Round out your build with matching seats, hardware, and other boat outfitting accessories from our marine catalog.
No. Despite the Swivl-Eze name, MPN 90720 is a fixed post that does not rotate on its own. Customer feedback confirms it is a fixed-height pedestal. To get rotation, mount a seat with its own swivel mechanism to the top seat mounting plate.
The mounting holes accommodate patterns from 4.85 by 4.85 inches up to 5.8 by 5.8 inches. That range matches most standard aftermarket seat bases and swivel spiders, so it works with common boat seat hardware without modification.
It is welded steel with a black powder coat finish to resist spray and humidity. The joints where the column meets the base and seat plates are reinforced, and both mounting plates are integrated into the steel structure for direct load transfer.
The post is a fixed 7 inches tall with a 6.75-inch square footprint, and it weighs roughly 4 pounds. The low height suits jon boats, bass rigs, and utility hulls where keeping the seat down low matters.
Yes. It is tested to standards set by the Coast Guard, the American Boat and Yacht Council, and the European Conformity program, so it is rated for the structural loads a boat seat experiences in normal use.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
