SKU: CW92137
UPC: 033886006262
MPN: 108616
Sika Aktivator-205 is a transparent, solvent-based adhesion promoter built to prep non-porous bond faces before sealants and adhesives go down. This is the surface treatment step boat builders and installers reach for when they need a Sikaflex or Sikasil joint to actually hold on glass, painted metal, and similar slick substrates. The 250ml bottle covers most rigging and fit-out jobs, from bonding windshields and hatch frames to setting deck hardware. If you bond, seal, or bed parts on your boat with Sika products, this activator is the wipe-on prep that makes the chemistry work the way it's supposed to.
Per Sika's specifications, Aktivator-205 is a colorless clear promoter that reacts with ambient moisture and deposits active groups on the substrate. Those groups form the chemical link between the surface and the primer or sealant applied over it, which is why skipping this step leads to peel failures on non-porous materials. It carries a short flash-off time, so you wipe the bond face, let the solvent flash, and move to your primer or sealant without long downtime. Application is straightforward with a clean lint-free applicator. Because it's transparent, it leaves no visible residue on finished surfaces, which matters when you're working near visible gelcoat or painted panels. It's formulated specifically for use ahead of Sikaflex and Sikasil systems, not as a standalone bonding agent.
Reach for Aktivator-205 any time you're bonding to glass, anodized or painted aluminum, plastics, or other non-porous surfaces with a Sika sealant. Typical marine uses include setting windshields, bedding cleats and rail bases, and sealing hardware that has to survive constant flex and water exposure. Wipe the activator on, let it flash, follow with the matching primer or adhesive, and you get a bond engineered to last. Pair it with the rest of your adhesive sealants and keep it on the bench with your other boat outfitting tools for your next rigging project.
It's an adhesion promoter for non-porous surfaces. It reacts with moisture in the air and deposits active groups on the substrate that act as a chemical link between the surface and the primer or sealant applied over it. The result is a stronger, longer-lasting bond on slick materials like glass and painted metal.
It's designed to treat bond faces before applying Sikaflex and Sikasil adhesives and sealants. Use it as the surface-prep step ahead of those systems on non-porous substrates. It is not a standalone adhesive, it prepares the surface so the sealant adheres correctly.
Wipe a thin, even coat onto a clean bond face with a lint-free applicator, then allow the short flash-off time for the solvent to evaporate. Once it has flashed off, follow with your primer or sealant. It dries clear and leaves no visible residue on finished surfaces.
It's formulated for non-porous substrates such as glass, painted and anodized metals, and many plastics. These are the slick surfaces where sealants struggle to grip without surface preparation. The 250ml bottle handles most marine rigging and fit-out work.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
