SKU: 15393
UPC: 042609160754
The Barnett Head Hunter Carbon Crossbow Bolts 20 In. 5 Pk. are the factory replacement shaft for shooters running Barnett 20-inch crossbows and other compatible rigs. Each bolt comes ready to shoot with a moon nock installed and a 100-grain field point already threaded in, so a hunter can sight in and head to the stand without sourcing parts separately. These are built for whitetail hunters and target shooters who want a known-quantity carbon shaft that matches their bow's tune. The 5-pack keeps cost reasonable when you only need a small batch for the season rather than a bulk case.
These bolts use a carbon shaft measuring 20 inches with a total weight of 303 grains including the moon nock, insert, and field point, which works out to roughly 13.78 grains per inch. Barnett holds straightness to +/- 0.003 inches and weight tolerance to +/- 2 grains, so flight stays consistent across the set. The shaft carries three 3-inch vanes for stable steering out of a crossbow's higher launch speeds, and Barnett notes improved wall thickness for added durability over earlier carbon shafts. Compatibility covers the Ghost 350, Penetrator, Wildcat C-5, Jackal, Whitetail Hunter II, Raptor FX3, and 20-inch models including the XP3338, XP400, XP370, Recruit XP, XP3885, XP390, and XP405.
Reach for these when you need matched 20-inch replacements for an existing Barnett crossbow or a compatible 20-inch rig, whether you're filling out a quiver before opening day or replacing shafts lost in the dirt. The pre-installed field points make them ready for range work straight out of the package, and you can swap to broadheads of the same weight come season. If you want a lighted option for tracking your shot at dusk, the Barnett Headhunter lighted 20-inch bolts fit the same crossbows. Browse our full lineup of crossbow bolts to match the right shaft to your draw weight and arrow length.
They fit Barnett models including the Ghost 350, Penetrator, Wildcat C-5, Jackal, Whitetail Hunter II, and Raptor FX3, along with 20-inch crossbows such as the XP3338, XP400, XP370, Recruit XP, XP3885, XP390, and XP405. Any crossbow spec'd for a 20-inch arrow with a moon nock should run them.
Yes. Each bolt in the 5-pack ships with a 100-grain field point already threaded in and a moon nock installed, so they are ready to shoot for sighting in and target work. You can swap to broadheads of matching weight for hunting.
Each finished bolt weighs 303 grains with the moon nock, insert, and 100-grain field point installed, per manufacturer specifications. The carbon shaft runs about 13.78 grains per inch with a weight tolerance of +/- 2 grains across the set.
They use standard moon nocks, which seat against the string and require correct rotational alignment in most Barnett crossbows. If your bow calls for a flat or half-moon nock instead, check your owner's manual before shooting.
Yes. Barnett offers Headhunter lighted bolts in the same 20-inch length that fit the same crossbows, useful for tracking your shot and finding the bolt afterward. We stock both the standard carbon 5-pack and the lighted three-pack.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
