Out of stock
SKU: GG-125Buckle
UPC: 768574001389
MPN: 125
The Gould & Goodrich Model 125 belt buckle is a replacement and build-out component for duty belt systems carried by law enforcement, military, and security professionals. It serves as the fastening point that holds a load-bearing belt closed under the weight of holsters, magazine carriers, and other gear. Sized to a 1.5-inch belt width per manufacturer specifications, the 125 fits standard-issue uniform belts and works as a direct swap when an existing buckle wears out. For anyone building or refreshing a duty rig, this is the hardware that keeps the rest of the system anchored.
Gould & Goodrich lists the 125 with a 1.5-inch length and a frame measuring roughly 38 to 40 mm, dimensions matched to common 1.5-inch duty and garrison belt webbing. The buckle is built to carry a loaded belt without flexing or slipping at the closure, which is the failure point most users notice first on cheap hardware. Because it pairs with a wide range of nylon and leather belts, the 125 is a practical pick for officers who run a modular setup and want to keep their existing belt while replacing only the buckle. It mounts cleanly to webbing in the 1.5-inch class, including our web duty belt and similar uniform belts.
Reach for the 125 when an old buckle has loosened, cracked, or no longer locks securely under a fully loaded belt. It also makes sense as a spare to keep in a gear bag, since a failed buckle takes a duty belt out of service entirely. Officers running a full uniform setup often replace the buckle independently of the belt itself to extend the life of the rig. Pair it with a fresh belt from our duty belt selection, or browse related hardware like belt keepers and other belt options to complete the build.
The Model 125 is sized for 1.5-inch belts, with a frame measuring roughly 38 to 40 mm per manufacturer specifications. That matches most standard-issue duty and garrison belt webbing in the 1.5-inch class, so it works as a direct replacement for worn buckles on existing uniform belts.
Yes. Many officers replace the buckle independently to extend the life of a belt that is still in good shape. Swapping the 125 onto your existing 1.5-inch webbing keeps your rig in service without rebuilding the entire setup.
The 125 is built to hold a load-bearing belt closed under the weight of holsters, magazine carriers, and gear without slipping at the closure. The fastening point is the part of a duty rig that fails first on low-grade hardware, which is why a solid buckle matters.
The SKU is GG-125Buckle and the UPC is 768574001389. The manufacturer model number is 125. Use these to confirm you are getting the correct Gould & Goodrich buckle when matching it to your belt.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
