SKU: 1004417
UPC: 042609002320
The Barnett Explorer crank cocking device is a gear-driven cocking aid built for hunters running Barnett XP Series crossbows. It reduces cocking tension by up to 93 percent, so the heavy draw weights that make accurate hand-cocking difficult come down to a manageable 13 pounds of force at the crank. This is the tool for shooters who want repeatable string alignment shot after shot, or for anyone who finds a rope cocker still demands more strength than they want to apply in a treestand or blind.
The unit works through a proven gear-reduction system that delivers serious mechanical advantage with a turn of the handle. Per manufacturer specifications, the crank caps required effort at 13 pounds maximum, and the handle is adjustable for right- or left-handed use. It fits the Explorer, Stalker, Expedition, and DRT-model XP crossbows, with confirmed compatibility across the XP350, XP370, XP380, XP385, XP390, XP400, XP405, Stalker 380 through 410, Hyper XP 405, and Recruit XP. Installation requires no permanent modifications to the crossbow, and the package ships with the crank and all mounting hardware. At 0.69 pounds, it adds little to the overall weight of a rigged crossbow.
For a hunter sitting cold in a stand at first light, drawing a high-poundage crossbow by hand can pull you off form or telegraph movement to game. The crank handle solves both problems, letting you cock smoothly and quietly with consistent string placement that supports a clean follow-up shot. If you run an older or universal-fit Barnett, look at the Barnett universal crank device. Shooters who prefer a simpler setup can compare it against the Barnett rope cocker or browse our full range of crossbow cocking devices.
It fits Barnett XP Series crossbows, including the Explorer, Stalker, Expedition, and DRT models. Confirmed compatibility covers the XP350, XP370, XP380, XP385, XP390, XP400, XP405, Stalker 380 through 410, Hyper XP 405, and Recruit XP. Check your model against this list before ordering.
Per manufacturer specifications, the gear-reduction system cuts cocking tension by up to 93 percent. The maximum force needed to turn the crank handle is 13 pounds, which makes cocking high draw-weight crossbows manageable for most shooters.
No. The Explorer crank installs with no permanent modifications to the crossbow. The package includes the crank and all mounting hardware needed to set it up on a compatible Barnett XP Series model.
Yes. The handle is adjustable for both right- and left-handed operation, so you can position it on whichever side suits your stance and shooting style.
A rope cocker reduces draw weight by roughly half and relies on a steady pull, while the crank uses a gear-reduction system to cut tension by up to 93 percent. Many shooters find the crank easier and quieter to operate, especially with heavier draw weights.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
