Balmar Color Display f/SG200 2-1/16" Second Display

The Balmar Color Display f/SG200 2-1/16" Second Display is a networked gauge expansion unit designed for vessels already running a SmartLink marine electronics system. If you've logged serious hours on the water, you know that redundant instrumentation saves lives—a second color display positioned at the helm or forward station gives you independent readouts of critical engine and electrical parameters without relying on a single point of failure. This unit integrates seamlessly into existing Balmar SmartLink networks, letting you monitor voltage, alternator output, and battery status from multiple locations simultaneously.

This compact 2-1/16-inch color display communicates via Balmar's SmartLink protocol, pulling real-time data from your primary alternator management and battery monitoring system without additional sensor installation. The display's small footprint (4 x 3 x 5 inches, weighing just 0.25 pounds) allows flexible mounting in tight spaces typical of modern console layouts. Its color screen delivers excellent visibility in direct sunlight—a must-have feature for open-water operation—and the standard 2-1/16-inch panel hole size fits most marine dash openings, eliminating costly modifications or custom adapters.

Cruisers, charter captains, and serious anglers who demand real-time power system visibility benefit most from adding a second display to their existing SmartLink setup. Whether you're monitoring alternator health during an extended offshore run or tracking auxiliary battery drain while anchored, this gauge gives you eyes-on confirmation at a glance. Installation requires only a connection to your existing SmartLink network—no complex wiring or recalibration needed. Note that warranty and technical support run through Balmar directly; register your purchase with the manufacturer to ensure full coverage and access to firmware updates.