5/16 Hi-Energy Pushrods - 7.870 Long

The COMP CAMS 5/16 Hi-Energy Pushrods - 7.870 Long represent a critical upgrade path for serious Ford Cleveland and modified engine builders seeking reliable valvetrain control. Pushrods are the mechanical link between your camshaft and rocker arms, directly translating cam profile into precise valve lift and timing. High-energy pushrods like this set are engineered to resist deflection under aggressive lift rates and higher spring pressures, preventing valve float and ensuring consistent valve events across the entire RPM range—a non-negotiable requirement when running performance cams in competition or street applications.

Constructed from steel and optimized for the 5/16-inch outside diameter standard, this set of 16 pushrods delivers the wall thickness and structural rigidity needed to handle elevated loads without permanent bending. The 7.870-inch length is purpose-built for Ford Cleveland architecture, ensuring correct geometry between the cam and rocker arm centerlines—critical for proper pushrod angle and rocker arm ratio. High-energy design minimizes deflection under dynamic valve spring loads, which translates to tighter valve clearance stability, reduced lash variability, and predictable engine response across throttle transitions and sustained high-RPM operation.

This pushrod set is ideal for enthusiasts upgrading to performance camshafts, higher-lift rocker arm ratios, or stiffer valve springs in Ford Cleveland and stroker variants. Installation requires proper length verification and rocker arm geometry inspection—pushrods that are too long or short will cause binding or excessive lash, degrading both performance and engine reliability. The set of 16 covers a complete cylinder count with spares, standard for small-block Cleveland applications. Verify compatibility with your specific cylinder head and block combination, as aftermarket or ported heads may require length verification before installation.