Pushrod - 3/8 .135 w/ .210 Radius 9.200 Long

The Pushrod - 3/8 .135 w/ .210 Radius 9.200 Long is a precision-engineered chromoly pushrod designed for high-performance engine builds where valve train reliability and geometry precision matter most. Built by TREND PERFORMANCE PRODUCTS, this 9.200-inch pushrod serves as a critical link between your rocker arms and lifters, transmitting valve actuation forces with minimal deflection. Whether you're assembling a street engine, race motor, or restoring a classic with modern performance upgrades, a quality pushrod with exact dimensional control is non-negotiable for proper valve timing and reduced harmonics.

This pushrod features a 3/8-inch outer diameter with 0.135-inch wall thickness, delivering the structural rigidity needed to resist bending under high-RPM valve spring pressure while maintaining a light weight profile of just 0.26 lbs. The 0.210-inch radius ball ends ensure consistent contact geometry with both the lifter and rocker arm, reducing wear patterns and extending service life in aggressive cam applications. Chromoly construction provides superior strength-to-weight compared to steel alternatives, making it ideal for engines running solid lifters, high-lift cams, or aggressive spring rates where pushrod flex can induce valvetrain noise and loss of efficiency.

Mechanics and engine builders selecting pushrods must match length and ball-end geometry precisely to their specific block, head, and rocker arm combination—this 9.200-inch length is engineered for applications where factory or aftermarket dimensioning calls for this exact specification. Installation requires careful valve lash adjustment and verification that pushrod runout stays within tolerance to prevent binding or excessive clearance. Verify your engine's pushrod length requirement before purchase, as incorrect length compromises valve actuation accuracy and can cause catastrophic valvetrain failure under load.