SKU: VIB10770
UPC: 690092156527
MPN: 10770
The Vibrant Performance -3AN Female to -3AN Male 45 Degree Swivel Adapter (MPN 10770) connects -3AN hose ends while changing line direction 45 degrees, giving builders a clean way to route fuel, oil, and coolant lines around tight engine bay obstacles. The swivel end rotates to align with the next fitting without twisting the hose, which makes assembly and later hose replacement far simpler. It works as a 45-degree coupler bridging a -3AN female port to a -3AN male connection. Anyone running braided line on a carbureted build, a turbo plumbing job, or a custom cooling setup will find this one of the more useful pieces in a fittings and adapters drawer.
Vibrant Performance machines the 10770 from 6061 aluminum alloy with a black anodized finish, per retailer specifications referencing the standardized product data. The 45 degree configuration positions the swivel female connection against the fixed male thread, so you set your angle and let the swivel take up final clearance. Precise thread engagement and the anti-leak seal design keep -3AN (3/16-inch) connections tight under the pressures common to oil pumps, fuel pumps, and fuel filter plumbing. Because the adapter mates directly to standard AN hose ends, it drops into existing line layouts without custom fabrication. The aluminum body keeps weight low while resisting corrosion from fuel and coolant exposure, and the anodized coating adds wear resistance at the wrench flats during installation. Pair it with matching swivel fittings for full angle control across a run.
Reach for this adapter when a factory line path won't clear a supercharger, intercooler pipe, or relocated fuel filter and you need a controlled 45-degree turn without kinking braided hose. It suits oil pumps, fuel pumps, fuel filters, and similar components that use -3AN plumbing. Builders putting together a complete line often combine it with PTFE or braided hose and the right hose ends, plus caps or unions to seal off unused ports. If you're spec'ing a full system, browse our adapter fittings to match thread sizes and angles across the build.
The -3AN female end swivels so you can rotate it to line up with the next fitting without twisting or stressing the braided hose. It also makes future hose replacement easier, since you can loosen and re-clock the connection rather than rebuilding the whole line.
Vibrant Performance machines the 10770 from 6061 aluminum alloy with a black anodized finish, according to retailer specifications. The aluminum keeps weight low and resists corrosion from fuel and coolant, while the anodizing adds wear resistance at the wrench flats during installation.
A -3AN connection corresponds to a 3/16-inch hose size and uses the 37-degree AN flare sealing standard. This adapter joins a -3AN female port to a -3AN male connection, so it mates directly with standard -3AN hose ends and components.
It's used to route -3AN fuel, oil, and coolant lines around engine bay obstacles where a 45-degree turn is needed. Retailer data lists it as suited to oil pumps, fuel pumps, fuel filters, and similar components that run -3AN plumbing.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
