SKU: VIB28612
UPC: 690092175139
MPN: 28612
The Vibrant Performance 60 Degree High Flow Hose End Fitting -12AN (MPN 28612) is a non-swivel fitting built for plumbing PTFE-lined flex hose in race fuel, nitrous, oil, cooling, and power steering systems. It serves the builder routing a -12 AN line that needs a moderate bend without choking flow or kinking the hose. The 60-degree angle clears tight engine bays where a straight or 90-degree end won't sit clean. CNC machined from 6061 aluminum with a black hard anodized finish, this is a working component for anyone running large-diameter feed lines and wanting a leak-free seal at the hose end.
This fitting uses a full flow design, meaning the internal bore stays open to match the -12 AN hose diameter rather than necking down at the bend. Sealing comes from an aluminum olive that compresses against the PTFE liner during assembly, creating a mechanical seal without flaring tools or special crimpers. The body is machined from 6061 aluminum alloy and finished in black hard anodize for corrosion resistance and a uniform look across a system. Per Vibrant Performance specifications, the fitting carries a one-year limited warranty. It is compatible exclusively with PTFE-lined flex hose and is not suitable for brake or hydraulic line applications. Pair it with matching 12 PTFE hose for a complete -12 AN run.
Reach for this 60-degree end when a feed or return line has to turn away from a fuel rail, oil cooler, or power steering reservoir without crowding nearby components. Because the olive compresses to the PTFE liner, assembly stays simple and repeatable on the bench or under the car. Builders running an all-black -12 AN system can match it to other angled ends and adapters for consistent fitment. Browse the full range of AN fittings and flex hose to complete the plumbing on your build.
This -12AN fitting is designed exclusively for PTFE-lined flex hose. The aluminum olive compresses against the PTFE liner to form the seal, so it will not work correctly with rubber or braided hose that lacks a PTFE inner liner.
No. Per Vibrant Performance specifications, this high flow hose end is not suitable for brake or hydraulic line applications. Its intended uses are race fuel, nitrous, oil, cooling, and power steering systems where high flow matters more than the pressures and standards required for braking.
No, this is a non-swivel high flow design. The fixed 60-degree angle means you orient the line by clocking the fitting during assembly rather than rotating it afterward. The non-swivel bore stays fully open to match the -12 AN hose diameter for maximum flow.
It is CNC machined from 6061 aluminum alloy and finished in black hard anodize for corrosion resistance and a consistent appearance across a system. The aluminum construction keeps weight down at roughly 0.22 lbs while staying strong enough for high-flow fluid systems.
No flaring or crimping tools are required. The aluminum olive compresses to the PTFE liner during tightening, creating a simple, leak-free seal. This makes assembly repeatable on the bench or in the vehicle without specialized equipment.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
