SKU: VIB10783
UPC: 690092156633
MPN: 10783
The -8AN Female to -8AN Male 90 Degree Swivel Adapter from VIBRANT PERFORMANCE (MPN 10783) is a directional fitting built to route an -8AN line around a 90 degree bend without kinking the hose or twisting the connection. It's aimed at anyone plumbing fuel, oil, or coolant lines in a crowded engine bay where a straight fitting simply won't clear the surrounding hardware. The female swivel end mates to a male -8AN hose end and spins freely, so you set the angle you need and tighten down without fighting the rest of the run. It earns its place anywhere clearance is tight and routing matters.
The female end carries an internal swivel that rotates a full 360 degrees before final torque, which lets the male outlet point exactly where the line needs to go. That swivel takes the rotational stress off the hose and off the threads it connects to, a common failure point when a static elbow gets forced into position. The -8AN sizing follows the standard 37 degree flare seat, so it seals against any -8AN hose end or hard line built to the same spec. Aluminum construction keeps the weight down to roughly 0.09 lbs, which matters when you're stacking several fittings across a single circuit. Pair it with matching -8 PTFE hose and the appropriate -8 straight hose ends to complete the run.
Reach for this adapter when a line has to clear a valve cover, frame rail, or turbo housing and a fixed-angle elbow leaves you binding the hose. Fuel return lines, oil cooler feeds, and breather plumbing are all common applications. Because the swivel sets independently of the hose, you can build the rest of the circuit first and dial in the final angle last. Browse the full swivel fittings selection for other sizes and angles, or work through our complete fittings, hoses, and valves catalog to spec out the whole system.
The female end rotates 360 degrees until you torque it down. That lets you point the male -8AN outlet exactly where the line needs to run, and it keeps rotational load off both the hose and the threads it connects to, which reduces the chance of a leak or a twisted line over time.
Yes. It uses the standard -8AN 37 degree flare seat, so it mates to any -8AN hose end or hard line built to the same AN spec. The male side threads into an -8AN female swivel hose end, and the female side accepts an -8AN male fitting.
It works on fuel, oil, and coolant circuits where you need a 90 degree turn in tight quarters. Common uses include fuel feed and return lines, oil cooler plumbing, and breather setups around valve covers, turbos, and frame rails.
This listing is for the VIBRANT PERFORMANCE 10783 adapter as supplied. Check the listing quantity at checkout, and add matching hose and hose ends separately to build out your line.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
