SKU: FRG482217-BL
UPC: 822320017342
MPN: 482217-BL
The FRAGOLA 482217-BL is a 90-degree adapter that mates an 8AN male flare to a 3/4 inch male pipe thread, finished in black anodized aluminum. It's built for anyone routing fluid lines into a hard fitting where a straight connection won't clear the surrounding hardware. Per the Fragola Performance catalog, it's rated for fuel, water, oil, transmission fluid, and air, which makes it a common pick for fuel system plumbing, oil cooler lines, and engine bay routing. The 90-degree bend lets you turn a line tight against a bulkhead or block without kinking the hose behind it.
Fragola machines this adapter from lightweight aluminum and finishes it in black anodize for corrosion resistance and a clean look against braided line. One end carries an 8AN male flare seat that seals against a matching AN hose end or coupler; the other threads into a 3/4 inch female pipe port. The pipe thread is tapered, so it tightens as it goes and seals on the threads themselves rather than a gasket. The fixed 90-degree angle holds the line in one plane, which keeps long runs organized and clear of moving parts. The part ships as SKU FRG482217-BL and is made in the USA to the same tolerances Fragola applies across its AN-to-pipe adapter line for tight, leak-free joints.
Reach for this fitting when an 8AN line has to make a hard turn into a pump, regulator, sump, or fitting block tapped for 3/4 inch pipe. Run thread sealant or PTFE tape on the pipe end before assembly and snug it to the orientation you need. It pairs naturally with 8AN braided line, hose ends, and unions, so most builders buy it alongside the rest of their plumbing. Browse our full fittings, hoses and valves selection, or jump straight to related adapter fittings and 8AN unions to complete the run.
It joins an 8AN male flare fitting to a 3/4 inch male pipe thread port at a 90-degree angle. One end seats against a matching AN hose end or coupler, and the other threads into a 3/4 inch female pipe-tapped port on a pump, block, or fitting.
Per the Fragola Performance catalog, this adapter handles fuel, water, oil, transmission fluid, and air. The aluminum body and black anodized finish hold up across those applications, which makes it suitable for fuel system, oil cooler, and general fluid routing.
Yes. The 3/4 inch end is a tapered pipe thread that seals on the threads themselves, so apply a fuel-compatible thread sealant or PTFE tape before assembly. The 8AN flare side seals on its machined seat and does not need sealant.
Yes. The Fragola Performance catalog lists this adapter as made in the USA. Fragola machines its aluminum AN-to-pipe adapters to tight tolerances for leak-free connections across the line.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
