SKU: RHP822-08-04-2
UPC: 810465013343
MPN: 822-08-04-2
The REDHORSE PERFORMANCE 822-08-04-2 is a 90-degree adapter that mates an 8AN male flare to a 1/4-inch male pipe thread, giving builders a clean transition between hard line tubing and braided or nylon hose. It's aimed at anyone plumbing a fuel, oil, or fluid transfer system where space is tight and a straight fitting won't clear surrounding components. The right-angle body lets you route a line off a port or block without kinking hose or fighting alignment. For builders working through a full plumbing job, this piece sits alongside the rest of our fittings, hoses, and valves lineup.
Construction is 6061 T-6 aluminum, CNC machine-cut and finished in a hand-polished black anodize for consistent color across a system build. The male-to-male design pairs an 8AN 37-degree flare on one end with a 1/4-inch tapered pipe thread on the other, so it threads directly into a block, rail, or gauge port while accepting a standard AN hose end on the flare side. The 90-degree elbow geometry keeps the connection compact and reduces stress on the line where clearance is limited. REDHORSE PERFORMANCE assembles these in a controlled environment for tight tolerances and easy alignment, and backs the fitting with a lifetime warranty against manufacturing defects. The result is a leak-free seal on both the flare and pipe sides. Pair it with matching 8AN straight hose ends to finish the run.
Reach for this adapter when you need to step an 8AN line down to a 1/4-inch pipe-thread port and the angle has to turn. Common uses include fuel pressure gauge ports, oil pressure senders, regulator inlets, and any block fitting where a 90-degree turn keeps the hose off hot or moving parts. Thread sealant or PTFE tape on the pipe side finishes the joint. Builders sourcing a complete system can match this with our 8AN union fittings and the broader adapter fitting selection to keep thread types and finishes consistent throughout the build.
It joins an 8AN male flare to a 1/4-inch male pipe thread at a 90-degree angle. One end accepts a standard AN hose end or fitting, while the other threads into a tapered 1/4-inch pipe port on a block, rail, regulator, or gauge.
The body is machined from 6061 T-6 aluminum and finished in a hand-polished black anodize. The CNC-cut construction holds tight tolerances on both the flare and the pipe thread for a leak-free seal.
The 8AN side uses a 37-degree flare seal and needs no sealant. The 1/4-inch pipe-thread side is a tapered thread, so PTFE tape or a thread sealant on that end is standard practice to ensure a leak-free joint.
The right-angle body lets you route a line off a port without sharp hose bends or kinks. It's useful in tight engine bays where a straight fitting would force the hose against surrounding components or hot surfaces.
Yes. REDHORSE PERFORMANCE backs the fitting with a lifetime warranty against manufacturing defects, per distributor information.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
