SKU: FRG681512-BL
UPC: 822320028522
MPN: 681512-BL
The Fragola 681512-BL is a -12 AN 150-degree hose end from the FRAGOLA Real Street PTFE line, built for plumbing fuel, oil, water, transmission fluid, and air systems where leak-free performance matters. Machined from aerospace-quality aluminum with a black anodized bright-dip finish, this fitting pairs with Series 6000 PTFE-lined hose to eliminate the fuel permeation problems that plague rubber-lined aftermarket hose. The 150-degree bend routes lines through tight engine-bay clearances that a straight or 90-degree fitting can't reach, making it a practical pick for builders running braided PTFE lines on fuel and oil circuits.
What separates this hose end is the reusable double-swivel design. The double swivel lets you clock the fitting to the exact angle you need after the hose is installed, so you're not fighting alignment during final assembly. A miniature olive retains the PTFE hose inside the fitting body, and the one-piece construction holds up to repeated assembly and disassembly without sacrificing seal integrity. Fragola backs the Real Street series with stainless steel lock wires and rates it for fuel, water, oil, transmission fluid, and air. Made in the USA, the 681512-BL carries MPN 681512-BL and works specifically with -12 AN Series 6000 PTFE hose. Browse our full selection of AN fittings when you're spec'ing out a complete line.
Reach for the 681512-BL when a fuel or oil line has to turn hard around a header, frame rail, or firewall and a straight fitting forces an awkward bend in the hose. The PTFE compatibility makes it a strong choice for E85 and high-temp oil systems that chew through standard rubber hose over time. Pair it with the matching -12 PTFE hose and round out the run with any tees, plugs, or caps the build calls for. See the rest of our braided and PTFE hose and our broader fittings, hoses, and valves selection to finish the job.
This hose end is designed for Fragola Series 6000 PTFE-lined hose in the -12 AN size. The PTFE liner and miniature olive retention system eliminate the fuel permeation issues common with rubber-lined aftermarket racing hose, making it suited to fuel, oil, and high-temp applications.
Yes. The Real Street series uses a reusable, one-piece design that can be assembled and disassembled multiple times. The double-swivel construction also lets you clock the fitting to the exact angle you need after the hose is installed, which makes final alignment far easier.
Fragola rates the Real Street PTFE line for fuel, water, oil, transmission fluid, and air. The PTFE compatibility makes it a good match for E85 and other ethanol blends that degrade standard rubber hose over time.
The 150-degree bend routes hose through tight clearances where a straight or 90-degree fitting won't fit cleanly. It's useful for turning fuel or oil lines around headers, frame rails, or firewalls without kinking the hose or forcing a sharp radius.
Yes. The Real Street PTFE hose ends are manufactured in the USA from aerospace-quality aluminum and finished with a black anodized bright-dip coating per manufacturer specifications.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
