SKU: FRG689006-BL
UPC: 822320013245
MPN: 689006-BL
The Fragola #6 90 Deg PTFE Black is a -6AN hose end fitting built for Series 6000 PTFE hose, aimed at builders plumbing fuel, oil, and other fluid systems where routing space is tight. The 90-degree angle pulls hose runs cleanly off ports and bulkheads without kinking, and one end terminates in a -6AN female connection while the other clamps to -6AN PTFE hose. Machined from aerospace-quality aluminum with a black anodized finish, it carries the look most builders want under the hood. We stock it alongside the rest of our fittings, hoses, and valves for full system builds.
Fragola's Real Street design uses a reusable double-swivel that allows clocking adjustment after the fitting is installed, so you can dial in hose orientation without breaking the connection apart. A miniature olive ferrule retains the hose and can be replaced when you reuse the fitting, and stainless steel lock wires secure the one-piece body. The fitting is machined to mil-spec tolerances and pairs with PTFE-lined hose to eliminate the fuel permeation that plagues standard aftermarket racing hose. Rated for fuel, water, oil, transmission fluid, and air, it handles the full range of fluid jobs on a performance build. Match it to compatible 6 PTFE hose for a sealed run end to end.
Reach for this fitting when a fuel rail, regulator, or oil port sits at an angle that a straight hose end can't reach without strain. The 90-degree bend and adjustable clocking let you route around headers, frame rails, and firewalls while keeping the hose path short. PTFE construction makes it a sound choice for E85 and other aggressive fuels that permeate rubber-lined hose over time. Pair it with a -6AN union fitting or a tee fitting to complete the plumbing on your build. Made in the USA.
It is built for Fragola Series 6000 -6AN PTFE hose. The PTFE liner pairs with this fitting to seal fuel, oil, and other fluids while eliminating the permeation common with standard rubber-lined racing hose. Match it with -6AN PTFE hose for a fully sealed run.
Yes. The double-swivel design is reusable, and the miniature olive ferrule that retains the hose can be replaced. That lets you take the fitting apart, swap the ferrule, and rebuild the connection on a new section of hose rather than buying a new fitting each time.
It allows you to rotate and set the hose orientation after the fitting is installed, without disassembling the connection. That makes it easier to route hose around headers, frame rails, and firewalls and to dial in the final angle once everything else is mounted.
Per the manufacturer, it is rated for fuel, water, oil, transmission fluid, and air. The PTFE-lined hose pairing makes it well suited to E85 and other aggressive fuels that degrade rubber hose over time.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
