Out of stock
SKU: GNS 1064.00
UPC: 616774106406
MPN: 1064
The G96 Gun Blue Creme in the 3 fl. oz. bottle is a cold bluing solution built for touch-ups and finish restoration on steel firearm parts. It's the product to reach for when a holster has worn the bluing off a slide flat, when a screw head or muzzle crown has gone gray, or when an older rifle needs its finish brought back to life without a full hot-tank reblue. G-96 Brand carries stock number 1064 on this bottle, and the creme format gives you control over small, targeted areas. For shooters maintaining their own steel, it pairs with the rest of our touch-up chemicals.
This is a creme rather than a thin liquid, so it stays where you put it instead of running off a vertical surface. Per manufacturer specifications, it produces a mirror-like finish guaranteed to blend into the original bluing, leaving no streaks or spots, and the result will not rub off or discolor once set. Bluing develops fast, within roughly 15 to 30 seconds of application, which lets you build color in controlled passes and judge the match as you go. Surface prep matters with any cold blue: strip oil and old finish first with a degreaser from our cleaners and solvents, apply the creme, then neutralize and protect the worked area with a quality oil afterward.
Reach for this when a full reblue isn't worth the cost or the wait. It handles worn slide edges, scratched receivers, exposed screw heads, sight bases, and the small bare spots that show up on any working gun. Carry it in the range box for field corrections or keep it on the bench for restoration work on older steel. After bluing, wipe the part down and protect it with one of our gun lubricants to lock in the finish and prevent flash rust. Buyers tackling larger refinishing projects may also want to look at our broader gun blue accessory kit.
Bluing develops within roughly 15 to 30 seconds of application per manufacturer specifications. Working in controlled passes lets you build the color gradually and judge the match against the surrounding finish as you go, rather than over-applying in a single coat.
No. The manufacturer states the finish will not rub off or discolor once set, and the mirror-like result is guaranteed to blend into the original bluing without streaks or spots. For lasting results, clean and degrease the steel first, then oil the area after bluing.
Strip all oil, grease, and old finish from the bare steel first using a degreaser, since cold blue only takes properly on clean metal. After applying and developing the creme, neutralize and protect the worked area with a firearm oil to prevent flash rust.
The 3 fl. oz. bottle is sized for touch-ups and small restoration work, such as worn slide edges, scratched receivers, screw heads, and sight bases. The creme format stays put on vertical surfaces and gives you control over targeted areas rather than coating an entire firearm.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
