Out of stock
SKU: SIGSPEC12OZCOMBOPACK
UPC: 798681603855
MPN: SPEC12OZCOMBOPACK
The Spec1 Combo Pack from SigArms is a three-bottle maintenance set built for shooters who want one kit to handle the full cleaning cycle. It ships with 2 oz bottles of lubricant, cleaner/degreaser, and bore solvent, covering everything from carbon and lead removal to friction reduction and final lube. The formulas are rated for all firearms, which makes this a practical answer for anyone searching for a Spec1 9mm pistol cleaning kit as well as rifle and shotgun owners who keep a single bench setup. It pairs well with brushes, jags, and patches you already run, filling the chemical side of the workflow.
Each chemical in the pack does one job and does it without the harsh hazmat profile of older solvents. The bore solvent dissolves carbon and lead fouling, the cleaner/degreaser strips oil and residue from action parts, and the lubricant carries a proprietary anti-wear agent that reduces friction and wear by 95 to 98 percent, Falex tested at 4500 PSI per manufacturer specifications. The lube holds up across a temperature span of -110°F to 1250°F, so it stays functional in cold-weather carry and hot range sessions alike. The non-toxic, non-hazardous formulas are safe on plastic, wood, and painted surfaces, and the lubricant will not harden, turn tacky, or attract dust, dirt, and sand. Run a few drops on a patch with one of our pistol cleaning kits and you have a complete process.
Use the bore solvent first to break down fouling, follow with the cleaner/degreaser on the slide, frame, and small parts, then apply the lubricant to rails and wear points. For a 9mm carry pistol, this kit handles a full strip-and-clean after a range trip and leaves a lube film that won't gum up the action in storage. The 2 oz bottles travel well in a range bag without taking much space. When you need to restock the mechanical side, browse our barrel cleaning brushes and additional chemicals and lubricants to round out the bench.
Yes. The three 2 oz bottles cover the full process for a 9mm: bore solvent to dissolve carbon and lead, cleaner/degreaser to strip residue from the slide and small parts, and lubricant for the rails and wear points. The formulas are rated for all firearms, so the same kit works on rifles and shotguns.
Three 2 oz bottles: lubricant, cleaner/degreaser, and bore solvent. That covers the chemical side of a complete cleaning cycle. You'll want brushes, jags, and patches to handle the mechanical work.
The lubricant is rated to function from -110°F to 1250°F per manufacturer specifications, with a proprietary anti-wear agent that reduces friction and wear by 95 to 98 percent, Falex tested at 4500 PSI. It will not harden or become tacky and does not attract dust, dirt, or sand.
Yes. The non-toxic, non-hazardous formulas are listed as safe on plastic, wood, and painted surfaces, which makes them appropriate for polymer-framed pistols as well as wood-stocked rifles.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
