Walther® Pdp® Schematic Handgun Mat - Charcoal Gray/cerus Blue, 12" X 17"

This CERUS GEAR cleaning mat gives Walther pistol owners a padded, solvent-resistant work surface printed with a full schematic of the firearm. It measures 12 by 17 inches, enough room to lay out a stripped slide, frame, and small parts without crowding. The charcoal gray and Cerus Blue colorway prints the parts diagram directly onto the surface, so the layout doubles as a learning reference while you work. Anyone who carries or maintains a Walther striker-fired pistol will get use out of it, whether that means a routine wipe-down or a full detail strip on the bench.

Construction is 1/8-inch (3mm) vulcanized rubber with a soft, heat-bonded polyester top. The textured rubber base grips the bench and stays put while you scrub a barrel or seat a slide. The graphics use dye sublimation printing, which means the schematic won't wear off, rub away, or peel after repeated contact with oils and solvents. That solvent and oil resistance is the point of a dedicated mat: spills wipe up instead of soaking into the bench. The schematic is drawn for the full Walther striker-fired lineup, covering the Compact, the Full-Size 4-inch and 4.5-inch, the Compact 5-inch, and the Full-Size 5-inch models. When you're done, the mat rolls up for storage in a range bag or drawer.

Reach for this mat any time you break the pistol down for cleaning, lubrication, or parts inspection. The diagram helps you track detents, pins, and springs so nothing rolls off the bench or goes back in the wrong order. Pair it with one of our pistol cleaning kits and a quality lubricant to build out a complete maintenance setup, or browse the rest of our cleaning mats if you run more than one platform. It carries a lifetime warranty and is designed and printed in the USA.