SKU: PRM19500
UPC: 749187195009
MPN: 19500
The PERMA-COOL 19500 Cool Pack is a complete universal cooling kit built around a 17-inch by 28-inch aluminum radiator and a pair of high-output electric fans. It's aimed at builders running street rods, swaps, and high-horsepower engines that have outgrown a factory clutch fan and shroud setup. The package combines radiator, fans, and an adjustable thermal sensor into a single unit, so you get matched components instead of piecing together a system. For anyone replacing a tired stock cooling stack or fitting a fresh chassis, this kit covers the heavy lifting in one box.
The radiator core measures 28 inches wide by 17 inches tall and carries a black powder-coated finish that resists acids, oils, and fuels. Two 13-inch paddle-blade puller fans move 6000 cubic feet per minute through laser-cut openings sized to feed air efficiently. A cross-flow isolator, exclusive to PERMA-COOL, helps manage flow across the core. The 12V fans run off an adjustable thermal sensor with a 170 to 210 degree range, so you set the trigger point to match your engine. Pulling the factory fan clutch, fan, and shroud frees up parasitic drag, which the manufacturer ties to gains in horsepower, torque, and fuel mileage. Installation uses hand tools and comes with fully illustrated instructions. Pair it with a matching radiator cap to finish the loop.
This kit fits builders who want a single-source upgrade for an overheating engine bay or a ground-up project that needs a modern electric cooling setup. Universal mounting holes mean it drops into most engine compartments with minimal modification, making it a practical pick for swaps where a factory radiator no longer clears. If you're working through a full cooling refresh, browse our broader selection of radiators and standalone cooling fans to dial in the exact configuration your build calls for. Reach out if you need help confirming fitment before you order.
The kit is built around a 17-inch by 28-inch aluminum radiator with two 13-inch paddle-blade puller fans and a 170 to 210 degree adjustable thermal sensor. It replaces the factory fan clutch, fan, and shroud with a matched electric cooling system in one package.
The dual 13-inch fans move 6000 cubic feet per minute through laser-cut openings. The fans run on 12V power and are triggered by an adjustable thermal sensor you set anywhere from 170 to 210 degrees Fahrenheit to match your engine's operating temperature.
It uses universal mounting holes and is designed to install with minimal modifications. The radiator measures 28 inches wide by 17 inches tall, so confirm your engine bay has clearance for those dimensions before ordering. Reach out if you need help verifying fitment.
PERMA-COOL states that eliminating the engine-driven fan clutch, fan, and shroud reduces parasitic drag, which it ties to gains in horsepower, torque, and fuel mileage. Electric fans only draw power when cooling is needed rather than spinning constantly off the crank.
The aluminum core carries a black powder-coated finish that resists acids, oils, and fuels. A cross-flow isolator, which is exclusive to PERMA-COOL, helps manage coolant flow across the core for efficient heat transfer.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
