Out of stock
SKU: CW56367
MPN: 2880.91
This is the factory battery replacement service from ACR Electronics for the PLB-375 ResQLink and ResQLink+ personal locator beacons. It covers owners whose beacon has reached the five-year battery interval and needs to be returned to full service life. Rather than swapping cells yourself, you send the unit in and it comes back tested, resealed, and ready to transmit when it matters. ACR recommends replacing the battery every five years to keep the beacon dependable in an emergency. The service includes the new 1103 battery, all parts, labor, and a Test Verification Report documenting the work. Browse our full lineup of personal locator beacons if you need a comparison.
The service is more than a battery swap. Each unit goes through a complete physical integrity check, a pressure test to confirm the housing still seals against water intrusion, and a data transmission test to verify the beacon signals correctly. Technicians replace the seal and o-rings, install the new 1103 battery, and dispose of the old cell to the proper standard. The Test Verification Report comes back with the device so you have documented proof the beacon meets spec. Because the o-rings and seal are renewed during the process, the watertight integrity of the housing is restored, not just the power source. The work is matched to the PLB-375 ResQLink and ResQLink+ specifically, so the parts and procedures are correct for those models.
Plan this service around the date stamped on your beacon, not the day it stops working. A locator beacon only earns its keep on the worst day on the water, and a depleted battery makes the unit dead weight in a ditch bag. Boaters running offshore, sailors on long passages, and anyone who keeps a beacon in a grab kit should send the unit in as the five-year mark approaches. Pair the refreshed beacon with the rest of your gear and check our EPIRBs and broader marine safety service offerings to keep everything current.
ACR recommends replacing the battery every five years to keep the beacon ready when needed. The battery has a shelf life, so plan the service around the date marked on your unit rather than waiting for it to fail. Sending it in early keeps the beacon dependable through your next interval.
The service covers a complete physical integrity check, a pressure test, a data transmission test, replacement of the seal and o-rings, installation of a new 1103 battery, and disposal of the old cell. You also receive a Test Verification Report documenting that the beacon meets spec after the work is finished.
This service is matched to the ACR PLB-375 ResQLink and ResQLink+ personal locator beacons. The parts, seals, and procedures are specific to those models, so the housing is resealed and tested correctly for that device.
This is a factory service that does more than swap the cell. It renews the seal and o-rings, pressure tests the housing, confirms the beacon transmits correctly, and disposes of the old battery properly. The Test Verification Report gives you documented proof the unit is back to full service condition.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
ACR Electronics
ACR Electronics
ACR Electronics