SKU: LEE91823
UPC: 734307918231
MPN: 91823
The Lee Pro 6000 Six Pack Reloading Press is a six-station progressive press built for reloaders who run high round counts and want one complete cartridge per stroke. It carries nearly 40 years of Lee Precision progressive design, with automatic indexing handled by a single moving part. The six stations give room for sizing, priming, charging, a powder check, bullet seating, and crimping in one cycle, so pistol and rifle loaders aren't forced to batch-process. Anyone stepping up from a single-stage or turret setup will recognize the jump in throughput. We stock this as a press-only unit (MPN 91823) for shooters building around their existing dies.
The frame is cast iron with a steel base, columns, and ram, tied together with all-steel linkage. The 28.4mm ram glides through 82mm of solid steel, giving over 7,300 square millimeters of support to keep alignment tight under load. Stroke and clearance handle the largest magnum rifle cases, so this isn't limited to short pistol brass. The automatic indexing system uses one moving part, swaps in seconds without tools, and deactivates just as fast for manual operation. The Breech Lock quick die change system accepts any brand of die, and the automatic priming system works with small or large primers from any maker. Spent primers drop into a collection tube, and the press accepts in-line bullet feed and powder check dies.
This press suits a reloader feeding a high-volume range habit or loading for several cartridges across a season. Set it up once for a caliber, then run hundreds of rounds per session, or pair it with caliber-specific kits like the 9mm Luger Pro 4000 kit if you'd rather start with dies included. For those weighing options, our 6.5 Creedmoor Six Pack Pro kit shows what a turnkey rifle build looks like. Browse the full lineup of Lee progressive presses and kits to match the configuration to your bench.
No. MPN 91823 is the press-only unit, built for reloaders who already own dies. The Breech Lock system accepts any brand of die, so existing sets work fine. If you want dies included, we carry caliber-specific Six Pack Pro and Pro 4000 kits that ship ready to load.
Yes. The press has enough stroke and clearance to handle the largest magnum rifle cases, alongside standard pistol brass. The 28.4mm ram runs through 82mm of solid steel for over 7,300 square millimeters of support, which keeps alignment steady through full-length sizing.
The indexing system advances the shell plate with only one moving part. It installs or replaces in seconds with no tools, and it deactivates just as quickly if you want to run the press manually for load development or troubleshooting.
The automatic priming system is rated for small and large primers from any brand. Spent primers feed into a collection tube during operation, keeping the bench clean and removing a separate priming step from the cycle.
Yes. Per Lee Precision, the Pro 6000 Six Pack is manufactured in the USA. The press uses a cast iron frame with a steel base, columns, ram, and all-steel linkage.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
