SKU: 100042969
UPC: 812296030513
MPN: BRK522
The Breek Arms Warhammer Mod2 (BRK522) is an ambidextrous AR-15 charging handle built for shooters who run suppressors, large optics, or simply want a tougher latch than the mil-spec part their rifle shipped with. Machined from 7075-T6 aluminum and finished in hardcoat anodized black, it drops into mil-spec AR-15 and M16 uppers with no fitting or gunsmithing. The oversized ambidextrous latches work the same from either side, which matters for left-handed shooters and anyone running a support-side charge. At roughly 0.98 oz, it adds almost nothing to the rifle while giving you a far more positive grip surface.
The Mod2 designation refers to the updated gas management on the stem. Breek Arms cut gas relief channels on the top and bottom of the stem and raised the rear shelf height to divert excess gas away from the shooter's face, a real benefit when shooting suppressed where blowback is heaviest. The latches use a set-back geometry that clears the bell on large objective scopes and 30mm-plus optics that crowd a standard latch. Textured grooves machined into both handles give a secure purchase with gloves or wet hands. The low-profile body keeps the latches close to the receiver until you need them. An American flag is laser engraved on the assembly, and the part is made in America per the manufacturer.
This is a practical upgrade for range training, competition, and any duty or defensive build running a can. If you charge the rifle off the support side or work malfunction drills under a clock, the dual latches earn their keep fast. Installation takes a couple of minutes with the bolt carrier removed. Pair it with a fresh AR-15 cam pin or a enhanced bolt if you're refreshing the upper, and check our broader rifle parts selection for the rest of the build.
No. The Warhammer Mod2 is a direct drop-in replacement for any mil-spec AR-15 or M16 charging handle. Remove the bolt carrier group, slide the old handle out, and install the Warhammer. The job takes a couple of minutes with no fitting or special tools.
The Mod2 stem has gas relief cuts on the top and bottom and a raised rear shelf that diverts excess gas away from the shooter's face. Suppressed rifles run with more blowback, so this gas management noticeably reduces the amount of gas that comes back toward your eyes.
Yes. The set-back latch geometry is designed to clear the bells on large objective scopes and wider 30mm-plus optics that tend to crowd a standard charging handle latch. That clearance is one of the main reasons shooters choose this handle for scoped builds.
Roughly 0.98 oz per manufacturer and retailer specifications. It's built from 7075-T6 aluminum, so it adds almost no weight to the rifle while giving you larger, more durable ambidextrous latches than the mil-spec part.
Yes. The Warhammer Mod2 is fully ambidextrous with oversized latches on both sides that operate identically. It's a practical choice for left-handed shooters and for anyone who charges the rifle from the support side during drills.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
