5/8 Aluminum Radius Rod 24in Polished

The 5/8 Aluminum Radius Rod 24in Polished from Ti22 PERFORMANCE is a precision suspension component engineered for street rods, custom hot rods, and fabricated chassis builds where independent front suspension geometry demands a lightweight yet rigid control arm solution. This radius rod is designed to work alongside traditional A-arm configurations or modern parallel-link setups, providing lateral location and support while maintaining minimal unsprung weight. Whether you're building a classic car with modern suspension geometry or upgrading an existing independent front end, this aluminum rod delivers the structural integrity required for reliable road handling without the mass penalty of steel.

Constructed from aluminum with a 1.125-inch outer diameter tube, the 5/8 Aluminum Radius Rod features 5/8-18 female threads at both ends, enabling straightforward bolt-in installation to frame mounts and suspension pickup points. The polished finish not only enhances aesthetic appeal in exposed suspension work but also provides corrosion resistance superior to bare aluminum, particularly important in road salt environments. At 0.91 lbs per 24-inch length, the aluminum construction reduces overall vehicle weight compared to steel alternatives—a critical advantage in suspension geometry where unsprung mass directly affects ride quality, braking performance, and chassis response. The 1.2 x 1.2 x 24-inch dimensions offer a compact, workable profile suitable for tight engine bay layouts common in hot rod and custom builds.

Fabricators, suspension shops, and serious hot rod builders benefit most from this component when engineering adjustable or fixed-length radius rods for independent front suspension systems. Installation requires solid frame attachment points and proper alignment setup; the 5/8-18 female threads accept standard grade-8 bolts or rod ends sized accordingly. Verify frame mounting boss locations and desired ride height geometry before assembly, as radius rod length and angle are critical to maintaining proper suspension geometry and preventing bump steer. Ti22 PERFORMANCE components are manufactured to precision standards suitable for street driving and competitive car show builds where both function and finish matter.