67-69 Camaro Front Sway Bar

The 67-69 Camaro Front Sway Bar by REKUDO is a critical suspension upgrade for first-generation Camaro owners serious about handling and cornering stability. Whether you're restoring a classic muscle car or building a weekend autocross competitor, this front sway bar directly addresses the inherent body roll and understeer that plagued original chassis design. First-gen Camaros benefit tremendously from anti-roll bar upgrades, which transfer weight more efficiently during turns and dramatically improve driver confidence through technical sections.

This REKUDO sway bar works by resisting chassis flex during lateral acceleration, redistributing suspension loads to maintain more consistent tire contact patch and reduce inside-wheel lift. The 49-inch span design (measuring 8.25 x 3.13 inches in cross-section) is engineered specifically for the 1967–1969 Camaro platform geometry and attachment points. A properly-sized front sway bar reduces body roll rate without creating excessive harshness, allowing both front wheels to work together during cornering rather than relying on the heavily-stressed outside spring. The 11.5-pound weight distribution is optimized to minimize unsprung mass while providing sufficient stiffness for measurable performance gains—ideal whether you're pairing it with stock springs or upgraded coilovers.

Restoration enthusiasts, street rodders, and track-focused builders will find this upgrade transforms the driving experience—especially on second-gen suspension swaps or when modernizing a numbers-matching original. Installation requires standard suspension tools and fits directly into factory attachment brackets on 1967, 1968, and 1969 models without modification. Pair this front sway bar with a matching rear unit for the most balanced and predictable handling characteristics across the entire vehicle.