84in Pro Stock Wheelie Bars

Options

$840.55
MSRP: $889.99
You save $49.44

Trusted By Over 250,000+ Happy Customers Serving outdoor enthusiasts nationwide

Info

SKU:CCE3623

SKU: CCE3623

MPN: C/E3623

Info

SKU:
CCE3623
MPN:
C/E3623

Description

The 84in Pro Stock Wheelie Bars from CHASSIS ENGINEERING are purpose-built anti-squat devices engineered for drag racing and high-performance quarter-mile competition. These wheelie bars prevent uncontrolled rear-wheel lift during hard acceleration, keeping your vehicle planted and predictable when launching from a standstill. Whether you're running a dedicated bracket racer, street-legal drag car, or pro stock competitor, wheelie bars are critical safety and performance equipment that maintain suspension geometry and tire contact under extreme load.

Constructed with the extended 84-inch length, these bars extend rearward to control weight transfer and prevent catastrophic over-rotation that can cause rollover or loss of steering control. The pro stock specification means they're designed to meet high-end drag strip standards and sanctioning body regulations (NHRA, IHRA, or similar competition rules). At 45.3 lbs and finished to industrial durability standards, the bars are fabricated from heavy-gauge steel tubing with properly engineered pivot points and trailing-arm geometry. The mounting footprint (6.5 x 4.5 inches) integrates with standard frame rails, while the 77-inch effective reach provides optimal anti-squat geometry for vehicles with extended wheelbases or significant power outputs.

Competition drivers and serious performance builders benefit most from pro-grade wheelie bars when running engines producing 400+ horsepower or competing in sanctioned bracket racing. Installation requires welding or frame-mounted brackets to the rear axle housing or frame, with proper alignment critical to prevent binding or asymmetrical lift. Confirm frame construction (solid axle vs. independent rear suspension) and existing suspension geometry before ordering, as wheelie bar effectiveness depends on correct tuning relative to spring rates, anti-roll bar setup, and weight distribution. These bars are essential for safety, consistency, and competitive advantage in any serious drag racing platform.

SpecificationDetail
Brand
CHASSIS ENGINEERING
MPN / Part Number
C/E3623
SKU
CCE3623
Weight
45.3 lbs
Dimensions
6.5 x 4.5 x 77 in
Type
Anti-Squat Wheelie Bars
Effective Length
84 inches
Construction
Heavy-Gauge Steel Tubing
Grade
Pro Stock Competition
Primary Application
Drag Racing, Bracket Racing
Mounting Footprint
6.5 x 4.5 inches

WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.