Bump Spring 2IN O.D. x 2.25in 350lb

The Bump Spring 2IN O.D. x 2.25in 350lb by EIBACH is a precision-engineered suspension component designed to supplement factory bump stops and prevent metal-to-metal contact during extreme suspension compression. This bump stop spring is essential for vehicles that experience heavy braking, off-road impacts, or lowered ride heights where factory travel is reduced and final-stage cushioning becomes critical. Whether you're upgrading a performance street vehicle, preparing a off-road rig, or fine-tuning a competition platform, this spring delivers consistent damping at the end of suspension travel.

With a 350 lb/in spring rate and 2 inch outer diameter, the Bump Spring 2IN O.D. x 2.25in 350lb provides controlled resistance as suspension nears full compression, protecting both vehicle and occupants from harsh bottoming. The 2.25 inch free length allows precise installation in OEM or aftermarket bump stop towers, while the red powder-coat finish resists corrosion and handles temperature cycling inherent to suspension dynamics. EIBACH's steel construction ensures durability across thousands of compression cycles without permanent deformation, maintaining consistent spring rate and performance life after life.

This component benefits suspension tuners, off-road enthusiasts, and track drivers who require precise control over final-stage suspension behavior. Installation is straightforward—the spring mounts directly in existing bump stop pockets on most coilover systems, lowered suspensions, and custom setups. Verify outer diameter and free length compatibility with your suspension tower before ordering; paired with quality shocks and springs, the Bump Spring 2IN O.D. x 2.25in 350lb ensures smooth operation and eliminates clunking or metal-on-metal contact during extreme driving conditions.