Bump Stop Puck 60dr Purple 1/2in

The Bump Stop Puck 60dr Purple 1/2in is a precision suspension component engineered for custom vehicle builds and performance modifications. As a mechanic working with lifted trucks and lowered cars, you know that controlling suspension travel and preventing bottoming-out is critical to ride quality and component longevity. This bump stop puck serves as a supplementary cushioning element in suspension systems where factory geometry has been altered, offering a secondary compliance point that absorbs impact when the suspension reaches full compression.

The 60 durometer rating indicates a firm elastomer compound—stiffer than standard bump stops—designed to provide progressive resistance during the final inches of suspension stroke. The purple coloring is a visual identifier common to Allstar Performance products, making identification and compatibility checking straightforward in the shop. At 1/2 inch thickness, this puck fits into existing suspension cavities or can be stacked with other elastomer elements to fine-tune end-of-travel characteristics. The compact 4 x 0.65 x 7 inch profile weighs just 0.11 lbs, making it an effortless addition to any suspension setup without adding unsprung mass.

This bump stop puck is ideal for builders working on independent front suspension (IFS) conversions, custom lowered vehicles, or air suspension systems where factory bump stop geometry no longer applies. Installation requires basic suspension knowledge—positioning the puck between the spring perch or control arm and the frame bump point, secured via adhesive or mechanical retention depending on your setup. When upgrading or modifying your suspension, use this component alongside quality shocks and springs to achieve consistent damping behavior and protect expensive suspension components from harsh bottoming impacts.