Shock Bumper 3in Tall Red Soft

The Shock Bumper 3in Tall Red Soft from INTEGRA SHOCKS is a precision bump stop engineered to prevent metal-to-metal contact during extreme suspension compression. Whether you're building a lifted truck, tuning a performance car, or restoring a classic with modern suspension geometry, this polyurethane bump stop protects your chassis and drivetrain from damage when the suspension reaches its limit. Bump stops are critical for any serious suspension setup—they act as a secondary spring that cushions the final inches of travel, preventing harsh bottoming-out that can crack welds, bend axles, or damage shock mounts.

This soft-compound polyurethane design offers controlled compliance compared to harder alternatives, allowing more progressive force absorption at the end of stroke. The 3-inch tall profile and 1.93-inch outer diameter indicate this is a tree-style mount that threads or bolts directly to shock bodies and chassis mounting points. The red stripe distinguishes this as a soft-rate option—ideal for street-driven vehicles where comfort and ride quality matter alongside suspension protection. Polyurethane resists oil, heat, and UV degradation far better than rubber, extending service life on lifted trucks or off-road builds that encounter harsh environments. The compact 0.1 lb weight ensures no unsprung mass penalty while the modest 5.1 x 2 x 5.2 inch footprint fits tight suspension geometry found in IRS (independent rear suspension) systems and modern coilover applications.

Mechanics and fabricators commonly install bump stops during suspension upgrades, lowering kit installs, or when replacing worn factory stops that have hardened with age. This soft-compound version is especially popular for daily-driven builds where suspension travel remains generous and progressive damping is preferred over abrupt bottoming. Verify your shock's OD and mounting style before ordering—the 1.93-inch outer diameter and tree-mount design suit most modern coilover shocks and OEM-style installations. Installation typically requires no modification; simply press or thread the bumper onto the shock body or mount point according to your suspension system's specification sheet.