Tube End 3/4-16 RH 1-1/4in x .120in

The Tube End 3/4-16 RH 1-1/4in x .120in from ALLSTAR PERFORMANCE is a precision spherical rod end designed for chassis fabrication, suspension linkage, and high-performance steering applications. This right-hand threaded connector is essential for bridging control arms, tie rods, and fabricated frame members where articulation and load transfer are critical.

Featuring a 3/4-16 right-hand thread, this tube end advances clockwise into a matching female threaded bore, which is standard across most aftermarket suspension kits and frame jigs. The 1-1/4-inch outer diameter and .120-inch wall thickness provide a balance between structural rigidity and weldability, allowing for full-strength TIG or MIG fusion without material burn-through. The spherical ball inside the tube end enables the rod to articulate through its full range, reducing bind and friction that could degrade handling response.

Custom builders and race technicians benefit from this component's design, which accommodates the flex inherent in welded assemblies and dynamic suspension travel. This tube end is particularly useful for fabricators building custom A-arms, drag-link assemblies, and adjustable toe-links, ensuring geometry accuracy while maintaining performance under lateral loads typical of cornering and acceleration.