Tube End 5/8-18 RH 1in x .058in

The Tube End 5/8-18 RH 1in x .058in is a precision weld-on rod end engineered for custom suspension builds, steering linkage assemblies, and high-performance chassis modifications. Designed by ALLSTAR PERFORMANCE, a trusted name in race-proven components, this right-hand threaded tube end serves as a critical connection point in adjustable suspension systems where durability and precise alignment are non-negotiable. Whether you're fabricating a custom A-arm, building a drag racing suspension, or engineering a street machine with full adjustability, this tube end delivers the mechanical reliability that separates professional-grade builds from compromised installations.

This component features a 5/8-18 right-hand thread pattern with a 1-inch outer diameter and .058-inch wall thickness, optimized for both strength and weight efficiency in motorsports applications. The weld-on design allows fabricators to integrate this tube end directly into tube assemblies, creating seamless load paths critical for suspension geometry under lateral and vertical loads. The precision thread specification ensures repeatability when dialing in suspension adjustments—essential for corner-weighting, camber tuning, and ride height modifications on competition vehicles. At just 0.19 lbs, it maintains minimal unsprung mass while providing the material integrity needed for full-throttle acceleration and high-speed cornering.

Professional fabricators, race shops, and experienced DIY builders rely on this tube end for front-end geometry corrections, adjustable upper and lower control arms, and tie-rod assemblies on both circle-track and road-course platforms. Installation requires TIG or MIG welding to a compatible tube—proper joint preparation and heat control ensure maximum strength at the HAZ (heat-affected zone). This component pairs seamlessly with spherical rod ends, jam nuts, and adjustment sleeves common to motorsports suspension kits, giving you fine control over camber, caster, and toe-in settings. Verify thread compatibility with your rod end or spherical bearing before ordering to ensure proper assembly and secure operation.