SKU: WIZ38012
MPN: 38012
The WIZARD PRODUCTS Foam Cannon is a pressurized foam gun built for anyone who washes vehicles by hand and wants to cut down on wash-mitt scratching. This foam cannon gun holds a soap-and-water mix and pushes out a thick blanket of suds that clings to paint, loosening dirt and road grime before you ever touch the surface. It's a straightforward pre-wash tool for detailers, weekend car owners, and racers cleaning down bodywork between sessions. Sold under WIZARD PRODUCTS part number 38012, it fits into the same detailing and cleanup workflow as our other shop tools.
The design centers on a pump-pressurized canister and a spray head that aerates the wash solution into foam rather than a thin liquid stream. You fill the reservoir with your car-wash concentrate, build pressure by hand, and trigger a wide foam pattern that coats panels evenly. The thick foam is the whole point: it holds contact time on the surface so soap can break down bugs, dust, and film before contact washing, reducing the grit dragged across clear coat. The 38012 runs off its own hand pressure, so there's no hose or air line to hook up. Shipping weight is roughly 1.64 lbs, keeping it light enough to carry around the car while you work. Pair it with a bug scrubber for stubborn front-end buildup.
Reach for this foam cannon at the start of any hand wash, before the mitt and buckets come out. A foam pre-soak is where you knock down the abrasive dirt that causes swirl marks, which makes it a smart first step for anyone protecting fresh paint or a show finish. It works the same way on a daily driver, a project car, or a race body between heats. When you've got the wash side covered, look through the rest of our shop tools and detailing gear to round out the kit, from scrubbers to cleanup supplies.
You fill the reservoir with a car-wash soap-and-water mix, build pressure by hand pumping, then pull the trigger to spray a thick foam. The spray head aerates the solution so it clings to panels, giving soap time to break down dirt before you touch the surface with a mitt.
No. The 38012 is a self-contained pressurized canister that you pump by hand, so there's no pressure washer, hose, or air line required. That makes it easy to use anywhere you can carry the unit, including driveways without a high-pressure water source.
A thick foam pre-soak clings to the paint and loosens abrasive grit, bugs, and road film before you make contact with a wash mitt. Removing that grit first reduces swirl marks and scratches in the clear coat, which is why detailers use foam as the first wash step.
Use a dedicated car-wash concentrate mixed with water per the soap maker's dilution ratio. A soap formulated to foam produces the thickest, longest-clinging suds. Avoid dish detergents, which strip wax and protective coatings from automotive finishes.
WARNING ⚠️ You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition and firearms. Please reference our requirements for ammunition orders to "restricted" states HERE. Always make sure you use the correct ammunition for your firearms. Ammo cannot be shipped to a PO Box. Please reference state & local laws before making a firearm or ammunition purchase.
